WEBVTT 00:00.300 --> 00:06.130 In this listen, I'm going to show you very quickly what are the different ways to restart your program. 00:06.480 --> 00:11.370 So, first of all, you will not get surprised if your program restarts and you don't know what you 00:11.370 --> 00:11.760 did. 00:12.010 --> 00:18.270 And also, if you seem to want to restart to start the program again from the beginning, then you know 00:18.270 --> 00:18.930 how to do it. 00:19.140 --> 00:23.310 So the first obvious way, of course, is to pull it off. 00:23.370 --> 00:29.170 You do know, for example, you unplug the USB cable and then you plug it back again to your computer. 00:29.460 --> 00:33.070 This will pull out of the Arduino and then put on the avenue. 00:33.090 --> 00:38.120 And once the adeno is put on the program directly, that's OK. 00:38.130 --> 00:41.730 But this isn't maybe not the best option whenever you want to restart. 00:42.090 --> 00:45.240 OK, you want to keep your plugged to your computer. 00:45.450 --> 00:52.500 So what you can do is you can see here we have a red button on the right button on the other node, 00:52.920 --> 00:55.270 and this is called the reset button. 00:55.800 --> 00:58.350 So here it's on the top left. 00:58.350 --> 01:01.620 It may be in a different place for you depending on your blog. 01:02.040 --> 01:08.430 And simply if you press this button, then the program is it's so simple. 01:08.430 --> 01:10.290 We are going to test that. 01:11.070 --> 01:11.860 All right. 01:12.450 --> 01:16.650 So I haven't been this science monitor with this program that you already know. 01:16.830 --> 01:21.930 And I'm going to press the reset button and you can see we have Elmo. 01:21.930 --> 01:23.060 How do you know again? 01:23.460 --> 01:28.680 So the program has been reset because we have started again from the set up function. 01:29.260 --> 01:35.050 OK, and now from the software side, so directly from your computer, how to restart the program? 01:35.070 --> 01:42.900 Well, actually, if you open the same monitor again, so if you close it and open it this way to reset 01:42.900 --> 01:44.390 the program, as you can see here. 01:44.610 --> 01:45.640 Hello, Arlingham. 01:46.380 --> 01:49.920 If I close it and open it again, this will restart the program. 01:50.910 --> 01:56.580 And to restart, you can also actually upload the code again, wi fi, upload the code. 01:56.620 --> 01:57.030 Well. 01:58.380 --> 02:04.050 Bloating and then imploding into program has been restarted, so I can see that also we decided when 02:04.410 --> 02:10.200 I click on this, the program to restart, OK, and then I'm going to upload again. 02:10.710 --> 02:14.760 You can see it kind of stuck here on the same monitor and then. 02:16.000 --> 02:16.400 Hello. 02:16.580 --> 02:17.460 Are you OK? 02:17.500 --> 02:19.900 You can see the program has restarted. 02:20.590 --> 02:25.810 All right, so to restart, you can simply this is maybe the easiest way is simply to press the reset 02:25.810 --> 02:27.190 button on the original. 02:27.660 --> 02:31.690 Otherwise you can just open close the same door. 02:32.050 --> 02:36.040 But note that this works only for some Archibald's. 02:36.100 --> 02:42.310 So, for example, you know, MIGA and I know it's fine, but other boats like Leonardo, this will 02:42.310 --> 02:42.820 not work. 02:42.830 --> 02:51.500 So the most universal way to restart from the Arduino ID directly is you can simply upload the code. 02:51.940 --> 02:54.280 OK, and this will restart the program.