Now that you have built your first in secret, whether with real components from the online simulation,
let's not waste any time and let's make this a blink, make sure you have correctly followed the previous
section on how to create your first Arduino program, because we are going to start from there.
What I'm going to do is I'm going to do five open or you can do control.
Oh, and well, here you have the different programs and projects you have created before.
And here the first program, it's what I need here and you will see that it is exactly the program we
need to make the blink.
So what we have done here is first in the setup, we use the PIN mode to make the PIN 13 as an output
PINACATE 13, which was connected, if you remember, to the integrated LCD.
And then in the loop we do digital right high to power.
On the end we wait for once again and then digital.
Right.
We've low to go of the ability.
So what has changed?
The thing is we want the exact same behavior.
Just what has changed is the PIN number because now it is not 13, but now it is 12.
So I'm going to change that into 12 here and also here and also here.
So make sure you change to 12 for every function that requires the PIN number.
Also, if at this point you are confused with what is a digital pin, what are the PIN code and digital
right functions?
Well, that's normal.
And I would explain to you everything quite soon in the course.
Right now, the important thing is to be able to make that link with the security you have to build.
So this program should be it.
And now what you do, of course, is you plug the original board to your computer.
You make sure on tools that you have the correct board and the correct vault, and then you can just
so you can verify and directly upload, which will verify and upload.
OK, Don applauding And you can see your first the first real energy that you have blood to your Adreno
is now blinking every one second.
Congratulations.
And if you want, you can do the exact same thing on Dinko Card.
So you just need to write the exact same code on Dinko and you should have the same result on dissimulation.