The following lessons, you are going to learn how to use the cellular communication in both ways.
But first, congratulations, because you have already made great progress with Arduino, you know,
have a good foundation which allows you to start your own simple project.
And more importantly, with this foundation, you will understand what you're doing and be more independent
while working on your project.
So you have learned the basics, including the installation setup, programming basics, how to write
simple addition programs, how to create, how to execute both with a simulation and with real hardware,
and how to use the digital and other things to control hardware components such as it is but buttons
and potential.
That is quite a lot of things already.
And everything you've learned so far, what I call you on information will help you all along the rest
of the course and all along your life while doing any hardware, our software project, not from this
base.
We are going to go further than you will discover more Arduino functionalities.
Among them, you will learn how to communicate both ways.
We say all communication, how to work with the time functionalities of the adeno, how to balance a
budget burden, how to use the Internet, and how to store values on the Arduino.
With the Eappen memory, this block of sections will help you create more robust and more diversified
project with the hardware you already have.
The knowledge you will get here will be useful for almost all the projects you create in future, because
those functionalities are amongst the most needed ones.
And then after that you will discover new hardware components which will allow you to create relevant
projects.
We will work with an ultrasonic sensor and LCD display screen and infrared remote controller and a photoresistor.
Those new hardware components are a bit more complex than what you previously used, and working with
them will give you enough knowledge to work with any other components you find in the future.
And finally, we will get to the final project of the course.
In this project, you will have a bigger challenge which will make you practice on everything you have
seen and will see in this class.
So let's get started to reach that goal one step at a time.
Note that everything you will learn from now is based upon the original foundation you have.
So if you have any doubt at any point, don't hesitate to come back multiple times to the previous lessons.
Get a reminder and a better understanding.
All right.
And now let's focus on the first block.
And in this block, let's look at the cellular communication.
You already have used cellular quite a lot to debug your program with the sale of Moniteau and also
a few times with the sale bloater well above from debugging.
Celil is mainly used to communicate between different components between a component and a physical
person.
In the following lessons, you will get a reminder of how to use cellular as well as my expectations.
And you will also see how to be able to send data from your computer to your R.M..