Please watch the entire video before going to the next section.
So this course is mainly divided into four big parts.
The first part on communication starts after the installation and configuration.
The second part will target Arduino functionalities and the third part, Raspberry Pi functionalities.
Each of the parts one, two and three are divided into a hands on explanation section and a practice
section with many projects that I also call activities.
Finally, the fourth part is the final project of the course, which is the intercom system.
You had a preview of now a few recommendations so you can get the most out of this course.
First, follow the course in the order because all the sections and lessons are built on top of each
other.
Then you can come back to any lesson.
But first, start from the beginning.
When I write code and do experiments first, watch the lesson and then write the code and do the experiments
by yourself.
Watching Plus doing is much more efficient than just watching.
And finally, I will give you many activities and projects during the course.
They can be quite challenging, but make sure to give them a try and spend a fair amount of time on
them before you watch the solution.
This is the only way you will truly make progress.
And one additional word of caution.
Well, pay attention when manipulating the hardware.
Always power off everything before you modify the circuit.
And also for the Raspberry Pi, make sure you correctly shut it down like a normal computer before you
remove the power cable.
And with that said, let's start with the installation and the configuration for this course.