Welcome to the curvature tool.
What an extraordinary tool that you are going to learn how to use it and I hope you will really master
it.
It's practically easy.
For this, we need to open a file just to have a template and work on the template.
So I click open and over here you will find curvature, the modus template that I like.
We go open.
Here you are, press command zero.
Now, for the sake of this course, I'm going to come to the layer here, select this layer, go back
and reduce the opacity as much as I can.
OK, something like this.
That's fine.
Come back to the layer and lock it and select the first layer to draw on, you know, these things we
mentioned there several times.
Now, the your tool is just over here.
The shortcut is shift something which I have never used.
But you can start using it.
So how does it work?
If you click once the first time nothing happens, you have a blue dot or red dot.
If you click again, you'll have a straight line.
Let's increase the struct to we have a straight line, nothing happens.
But then when you start moving on, you will notice that curves are being created depending on the third
point.
Now notice two curves are being adjusted, the one where you have at the end the curvature tool and
the previous one.
And that's what makes it very interesting and quite intelligent.
So if we come over here, you're not going to go very easy.
And your aim maybe is to make the least anchor points or points.
So I'm going to just drop it over here.
I think it's this fight now going again.
You notice that is even adjusting the other one.
That's what's going to happen.
I'm come over here and then over here and not is adjusting a bit.
All of them are going to come, in fact, just here.
Then go ahead, but here is not as it's not working.
Don't worry about it.
Continue a bit.
Let's remove the feel that they've done this before.
OK, and then come back here.
Now, I'm going to go this side and notice how it's adjusting the curve.
So this is the curvature to it.
Adjust the curves for you.
Pretty easy to use.
And somehow it's boring to use because it does almost everything for you.
Now I'm doing it a bit carelessly just to show you how it works.
OK, and then I'm going to come over here and not like you would say, this is wrong.
Look is going to adjust it.
OK, I'm going to come over here.
Then when we come back to the beginning is going to close the path itself, so you're not in the circle,
on the lower left, on the lower right of the curvature to.
So here it crosses.
So you might say, oh, this is not very good, but actually can click now and start adjusting them
the way you would like.
OK, so that's some adjustment and notice how it's adjusting all over almost.
OK.
It's doing quite some adjustment.
We could have done this and being meticulous at the beginning.
It's actually this is the concept itself is as easy as this.
Now you might say, OK, here is not very good.
You can at a point and start adjusting again.
Notice how even the curves before and after the curve are manipulating here are being adjusted.
If you decide, OK, this point is not good, selected and press the delete, it goes away.
Now for this, let's zoom in and we're going to do the same.
We can start from here.
For example, go over here and to here and notice the curve is almost being done and being pretty speedy
about it.
OK, I'm going to come over here and over here.
Notice how it's going to curve again.
Here you are.
OK, and is going to curve actually is going to curve all over the place and make your life very easy.
Now, something you don't like, click and just adjusted.
Now for the eyes here, it's a circle, so today circle, we can use the circle to make sure there are
perfect circles so you can click, click, click, click, and this is your circle and the time click
and click.
I made a mistake.
And click over here, click over here and here and just over here, how I'd like working sometimes just
for fun is to click here and then click here, close the path.
And close the path.
OK, then come back here, put another one and just throw it like this unadjusted.
OK, so actually this is how you use the conversion tool.
Nothing more.
Nothing less.
Now, with the curvature tool, you don't have to do curves all you can do straight lines, if you click
once, you will have a curve notice.
Now, we have curves here.
If you want a straight line or a hard angle, you can press the option and click once.
OK, so now you have a light press option and here you are.
Another way is to double click and double click.
But I prefer to hold this option key and here I am doing the curves.
But they are not very good curves.
OK, they are really straight lines.
So I actually can do, you know, very good straight lines and let's close it one click it.
You do call if you get, uh, you know, arrows coming out, sharp corners, you can come to the stroke
of scene that I will go through it even more around both the corners.
Here you are done.
Now, one problem is the curvature to let's say you want to continue here to come over.
It will not.
Let me put another point here.
Notice it.
We select the path itself.
So usually what I do, I put aside come back here, for example.
I want to draw this line, so I'll put it over here, then click on it and move it.
I'll click on it and move it.
Now you notice because I selected this one is continuing from here, I could have continued from the
other side.
But let's select this one and let's come over here and double click.
Double click or the option key and I can double click here.
It will actually select the other path.
So I'm going to the outside and then bring it in.
I like these games.
Now, if you decide to continue from here is not going to happen.
OK, guys, you have to continue from the end of the path.
Not this guy now I want to draw another drawing, but then this is coming with me, you know, is connected
to the other one.
The way to disconnect, to escape, escape again, OK, is disconnect now.
Not is the shape of it here, it has lines, it has curves, it has hard angles or change of angles,
if you like.
So we are going up, then we want to go down.
So how would you work here?
First of all, let's start with a line.
So DoubleClick come over here and also DoubleClick.
The way I like working is to double click everywhere.
OK, I'll show you another method here.
I clicked once, so I will double click and then click and now I'm placing the option key.
OK, here you might say, OK, what are you doing.
Well I'm going to show you.
What I'm doing is going to be very fun.
I will stop here.
I click in the middle here and just curve it the way I like.
So somehow I'm not restricted to just this one.
I just it once.
Then I play with the curves and I love working like this.
Up to you guys.
OK, fine.
You got the point I'm going to undo.
I can do a lot, and when it comes to this guy here, you can click over here and then over here does
the Calvinistic.
Now you kind of go on this side since you broke in this method, you are going to click here and then
click here once, not as it did the code for you.
Click here and come over here, double click.
Now, I made a mistake here.
It should be a double click, hard corner.
Very easy to adjust.
Double click on it.
Here you are.
Did it.
So put one over here and double click did not make a mistake and they would click here and over here
if by mistake you click once call.
That's not good because you got to make a curve here.
You want to double click on it and then you come back, click and click again.
And we are clearly everywhere.
So I'm going to click over here and over here.
Made mistakes or double click here.
I know that we make a lot of mistakes.
So double click here, click and we go on.
And actually I clicked once here, so I'm going to double click here and double click here.
Here you are.
Very nice from here to continue.
I'm going to I will press the option.
Click OK, that's a hard corner then.
Here click once then here just press option key click here option and click so hard angles option and
click or double click now curves.
You just click once and here notice how it's working.
This is a double click or option.
Click an option.
Click a simple click an option.
Click an option.
Click simple click option click.
And of course take it outside then bring it in.
That's pretty amazing, right?
OK, let's press the escape key to exit.
Over here we go, one, I prefer to go to three, four.
It's going to rotate not this, OK, five.
It didn't work.
OK, no problem.
So he come over here.
Where would you like to adjust to?
This is if we double click here now, it's going to be the other way.
That's not right.
So let's put another one here.
Adjusted the we would like another one here.
Notice how the curvature tool is really doing the job for you.
Pretty easy and pretty nice.
To do the I, I will do one, two and three and four, and I just I need to double click here and double
click here or click here, so I'm going to option click.
OK, here you are.
So here one and two and option click and just close it and then double click here and then click and
I get up.
Very nice.
Now we come to the fire.
The fire here is a mixture of lots of things, cliques and double clicks and option cliques, whatever
you like.
So if you try to do this one, actually this should be your homework.
You can click and turn, OK, and then come over here.
That's how it's going to rotate with me.
Didn't rotate to come back.
No problem.
And adjust it here.
Also adjusted.
So now let's be more careful.
Come over here and here.
I need to option click.
And here, just a click, and he had just a click.
And we go on is getting boring, right, guys?
OK, now we can continue this one.
I'm going to double click here and this one here to curve and double click here.
One here to curve and double click on the top.
We can click over here and curve it just over here and also curve it here.
Notice how it's going to change here, right?
OK, I.
Good.
Let's bring it over here.
Let's take this one here.
OK, and then another one and let's close over here, ok.
Up to now to work the others, so that's how easy is the current schedule and that's how important it
is to learn it very well, you need to do a lot of exercise, actually.
It's a lot of fun.
It's something that you can use much more than the famous pen to.
OK, guys, this is about the curvature tool in French is curvature is really nice.
In fact, couverture.
I really nice.
I love French.
I would see you in the next video.