Terrific.
So now we're going to set up our network setting of the school as Harvey to server.
So in the first stage will enter the network settings and include our virtual computer in the virtual
network.
And for this, we select our Escuela well server to virtual computer and click settings.
Click on Network Tab.
And in the adapter, one tab click attached to click on that network.
So in the name section will select Not Network, which is in the IP block 10 zero DOT 2.0 through 24.
Of course, since we're going to install ask you all server on this computer in the next step, we will
define two different static IPS.
For this, we will add a second network car to our escarole server to virtual.
So this either a card will be used in a cluster structure and click on adapter to.
Enabled network adapter.
And in the attached to Section Quicknet network.
Now in the name selection will select that network one.
Which is the 10 zero three nine zero through 24 IP block.
And by pressing the OK button, this process is now complete.
So let's click the start button, and that starts our virtual computer.
And we can now log in for a username administrator, password admin, one, two, three, question mark
and exclamation mark.
Now click on the search icon type ACMD and enter it on the command line.
And right, I.P. config on the command screen and get the IP information.
Now, of course, we need these to be static, so we'll define the IP values here.
Let's click the search icon and type in Ethernet setting.
Click on Ethernet setting from the results, they can change adapter options.
And that opens up the network connection screen.
So on this green will see to Ethernet cards.
And we will define the static IPS for them in order, so, right, click on Ethernet one and click properties.
And that opens the Ethernet property screen, so double click on Internet protocol versions for DCPI
before, or you can click on the properties button on the screen.
It doesn't matter.
Either way, you get the Internet protocol version for TCP, IP for property.
And you can click on use the following IP address and enter an unused IP address, provided it is in
the same block.
Well, I use I'll use 10 dot zero two two zero two for the Ethernet card, so I'm just going to write
10 zero two two zero two and the IP address section.
And for the subnet mask, 255, 255, 255 zero.
Now for the Gateway 10 zero two dot one.
And by clicking, OK, that will complete the process.
So now here on Ethernet to right, click and click on properties.
And that opens Ethernet property screen double click on DCP IP V4 or click the properties button.
And that opens up the TPP for properties window, so click on use the following IP address and an unused
IP address provided it's in that same block.
OK, I'm going to use 10 zero three two zero two for my second Ethernet card and enter 10 zero three
two zero two right here in the IP address section.
And for the subnet mask, 255 dot 255 dot you 5.0 and we'll leave the gateway blank again.
All right, so click, OK, and that completes the process.
So now we can get to the cluster set up.