Great.
So now we will make the network settings of Askew will serve one.
And in the first stage, we're going to enter the network settings and include our virtual computer
in the virtual network.
So for this, we'll just select our rescue all serve one virtual computer and click settings.
Click on the network tab.
And click on attached to right here in the adapter, one tab.
Click on that network.
And in the name selection select not network.
In the 10 dot zero two zero through 24 IP block click OK and exit.
Now, since we will install escarole server on this computer in the next step, we need to define two
different static IPS.
So if this will just add a second network card to our ask, you will serve one virtual computer.
So this card will be used in our cluster structure.
So in the virtual box screen, click on settings for Ask You All Server one.
And network adapter to.
And click enable network adapter.
So here, just click on that network in the attached to section.
And in the name section will select not network one, which is the 10 zero three zero to 24 IP block.
And this process completes by clicking the OK button.
And by clicking, the start button will start up our virtual computer.
And let's log in user administrator, password admin, one, two, three, question mark, exclamation.
Now click on the search icon type CMD and enter it on the command line.
Well, right, I.P. config on the command screen and yet the IP information.
And we will make sure that the IP that we see here is static.
So we can now click on the search icon, right, Ethernet setting, click on Ethernet setting from the
results here.
And click on change adapter options on this screen.
And that opens a network connection screen.
So here we see two Ethernet cards and we'll define the IP addresses for them in order, so we'll right
click on either net one and click properties and the Ethernet properties screen opens or double click
on Internet Protocol versions 46 IPV for.
Or of course, you can click on the properties button right here on the screen.
And the Internet protocol version for TCAP, IPV for property screen opens so click on use the following
IP address and will enter an unused IP address.
Provided it's in the same block, I know you knew that, but I had to say it.
So I will use 10 zero to that to one for the Ethernet card.
Remember, I used it for 10 zero to not 200 on the ad server, so well, right.
Ten zero two two zero one.
As its IP address.
Subnet.
255, 255, 255 zero.
And for the gateway, 10 zero to dot one.
And click, OK, and that completes that process.
Great, so now, right, click on Internet two and click on properties.
That opens the Ethan Up property screen double click on IPV for Tsipi V4 or click the properties button.
And that opens this screen, so click on they use the following IP address and will enter an unused
IP address provided it's in the same block.
And what am I going to do?
I'm going to use 10 zero three two zero one for the second or Ethernet to card.
So in the IP address section entered 10 zero three two zero one.
Subnet mask is 255, 255 that 215 dot zero.
And we leave the gateway section blank.
Click OK, and that completes the process.