1 00:00:01,080 --> 00:00:07,410 Now, since we will install active directory on this computer in the next step, we need to set the 2 00:00:07,410 --> 00:00:09,510 IP address to be static. 3 00:00:10,760 --> 00:00:16,520 So on the first stage will enter the network settings and include our virtual computer in the virtual 4 00:00:16,520 --> 00:00:17,030 network. 5 00:00:18,660 --> 00:00:26,910 So for this will select our 80 Salvy, that's our virtual computer and click settings, click on the 6 00:00:26,910 --> 00:00:32,700 network tab we click attached to in the adapter one tab. 7 00:00:33,960 --> 00:00:35,580 Click on that network. 8 00:00:37,240 --> 00:00:45,640 And in the name section, just select that network, which is in that 10 zero two zero all the way through 9 00:00:45,640 --> 00:00:47,110 24 IP block. 10 00:00:50,240 --> 00:00:53,960 So a lot of second, either that card to the 80s serve computer. 11 00:00:56,930 --> 00:01:01,250 And the reason for this is that I'm going to use it to access the disc. 12 00:01:02,600 --> 00:01:06,530 That I will add to the 80s here computer and the cluster structure. 13 00:01:07,480 --> 00:01:09,310 So just click on adapter to. 14 00:01:10,510 --> 00:01:13,050 Enable network adapter. 15 00:01:13,950 --> 00:01:18,000 And click on that network in the attached to section. 16 00:01:19,480 --> 00:01:29,350 Now, the name section will select Nat Network one, and that, of course, is in the 10 zero 3.0 zero 17 00:01:29,350 --> 00:01:30,850 through 24 IP block. 18 00:01:32,280 --> 00:01:33,120 All right, so. 19 00:01:34,190 --> 00:01:37,190 That process is completed just by clicking the OK button. 20 00:01:38,870 --> 00:01:47,780 So click OK, and all right, so let's start our computer log in, username administrator, password 21 00:01:47,780 --> 00:01:52,250 admin, one, two, three, question mark and exclamation mark. 22 00:01:53,250 --> 00:01:56,190 All right, so first, let's learn our IP blog. 23 00:01:57,520 --> 00:02:03,420 So click on the search icon type command and then enter it on the command line. 24 00:02:04,520 --> 00:02:12,440 All right, IP config on their command screen and get the IP information and we'll define a static IP 25 00:02:12,440 --> 00:02:13,820 using the information here. 26 00:02:15,570 --> 00:02:20,880 So just right click on the network button in the lower right corner of the screen, click open network 27 00:02:20,880 --> 00:02:21,990 and Internet settings. 28 00:02:24,140 --> 00:02:28,520 And click on change adapter options on the screen that appears. 29 00:02:29,980 --> 00:02:36,670 The network connection screen opens and it's in the screen, if you right, click on the Ethernet card, 30 00:02:36,940 --> 00:02:38,320 just click on properties. 31 00:02:39,860 --> 00:02:49,580 The Internet property screen open, so double click on Internet Protocol version for TCP IP v4 or click 32 00:02:49,580 --> 00:02:51,370 the properties button on this screen. 33 00:02:54,120 --> 00:03:03,780 So TCP IP for property screen opens and click on Use the following IP address and the fine and unused 34 00:03:03,780 --> 00:03:09,090 IP address in the same block as the IP address seen on the command screen. 35 00:03:11,100 --> 00:03:17,010 So I'm going to use 10 zero to 200 for my IP address. 36 00:03:18,170 --> 00:03:25,340 You can you can give any IP address you want, provided that it is within that same IP block. 37 00:03:27,330 --> 00:03:32,700 So all entered 10 zero to 200 in the IP address section here. 38 00:03:34,350 --> 00:03:40,860 And for the subnet mask, 205 to identify 5.5 5.0. 39 00:03:42,630 --> 00:03:46,500 And for the Gateway 10 dot zero tuda to. 40 00:03:48,470 --> 00:03:53,300 And we will use this server as the DNS or domain name server. 41 00:03:54,440 --> 00:04:02,690 And for that reason, all right, our own IP, which is 10 zero down to not 200 in the U.S. 42 00:04:02,750 --> 00:04:04,910 The following DNS server addresses section. 43 00:04:07,040 --> 00:04:09,960 Right, so click OK, and that completes that process. 44 00:04:13,460 --> 00:04:16,730 So, right, click on Internet two and click on properties. 45 00:04:17,870 --> 00:04:20,480 And the Ethernet property screen opens. 46 00:04:21,960 --> 00:04:30,090 And then here on the Internet protocol versions for TCP, IP, for double click on it, or you can click 47 00:04:30,090 --> 00:04:31,530 on the properties button on the screen. 48 00:04:34,010 --> 00:04:38,420 And then when you get this screen open, click on the use the following IP address. 49 00:04:39,740 --> 00:04:43,190 So in other words, it's here in IPV for propertied. 50 00:04:45,070 --> 00:04:50,230 And then we can enter an unused IP address, provided it is in the same block. 51 00:04:51,260 --> 00:04:57,170 And yeah, at the risk of boring you, I am going to repeat myself when things are very important and 52 00:04:57,170 --> 00:04:57,890 necessary. 53 00:04:59,880 --> 00:05:07,980 So remember to use the same IP block, I'm going to use 10 dots here, about three dozen, 200, so 54 00:05:07,980 --> 00:05:12,240 I'm entering 10 zero three that 200 in the IP address section. 55 00:05:14,050 --> 00:05:19,990 And for the subnet mask, 255 dot 205, that 205 dot zero. 56 00:05:21,540 --> 00:05:23,670 This time, we'll leave the gateway section blank. 57 00:05:25,840 --> 00:05:32,350 And of course, by clicking OK, a complete subprocess so we can move on to the network settings of 58 00:05:32,350 --> 00:05:33,250 the other servers.