1
00:00:05,860 --> 00:00:10,780
So now we want to right click on the setup file on the server and start the installation.

2
00:00:14,310 --> 00:00:20,400
Now, here's the insulation tab, so click on Add Noad to an escarole server failover cluster.

3
00:00:22,840 --> 00:00:27,310
So the next screen asks if we can do an update in the set of five.

4
00:00:28,760 --> 00:00:33,740
Well, if we click on the section that says Use Microsoft Update to check for updates, which is recommended,

5
00:00:34,550 --> 00:00:36,830
it will indeed check for those updates.

6
00:00:38,110 --> 00:00:42,190
However, since the server we set up is closed off to the Internet.

7
00:00:43,800 --> 00:00:45,970
And we can actually do this update later.

8
00:00:46,860 --> 00:00:48,570
Let's proceed without clicking.

9
00:00:49,710 --> 00:00:50,940
Just by saying next.

10
00:00:57,410 --> 00:01:02,090
So here we can make some of the necessary controls on our next screen.

11
00:01:03,120 --> 00:01:07,030
And we'll get some of the warnings that we receive when installing the first node.

12
00:01:07,650 --> 00:01:12,930
So just continue by saying next and it asks for product key on the next screen.

13
00:01:13,950 --> 00:01:20,670
And we'll repeat the process that we did on the first server, so next screen we mark, I accept the

14
00:01:20,670 --> 00:01:22,770
license terms click next.

15
00:01:24,870 --> 00:01:30,870
On the next screen, we need to select the instance belonging to the cluster we set up in server one

16
00:01:31,440 --> 00:01:34,650
from the actual server instanced name below.

17
00:01:37,220 --> 00:01:41,150
So after choosing wisely, we continue by saying next.

18
00:01:43,830 --> 00:01:45,610
All right, so here's a screen.

19
00:01:46,290 --> 00:01:51,390
This is where you will see Kluster network configuration as follows.

20
00:01:52,570 --> 00:01:57,640
Click the box on the left, you will see the configuration that you made on the first server.

21
00:01:58,860 --> 00:02:02,130
So we can continue to move forward just by saying next.

22
00:02:06,920 --> 00:02:11,930
And up pops the SQL Server Service accounts.

23
00:02:13,250 --> 00:02:18,140
For SQL Server database engine and escarole server agent service account.

24
00:02:19,030 --> 00:02:24,730
The accounts that we have sat on, server one will be listed, so we only need to fill in their passwords.

25
00:02:26,100 --> 00:02:29,010
And proceed forward by saying next.

26
00:02:32,400 --> 00:02:36,390
And now we can complete the insulation just by saying install on the last screen.

27
00:02:37,780 --> 00:02:46,180
Now, you should perform the configurations in my article titled Configurations to be Made in new installation

28
00:02:46,570 --> 00:02:47,650
on both servers.

29
00:02:48,960 --> 00:02:56,700
However, while setting the ports in configuration manager, you should not change all the ships, as

30
00:02:56,700 --> 00:03:07,560
in the article above, but but only change the IP port that you set, IP all and IP all and restart

31
00:03:07,560 --> 00:03:08,520
the service.

32
00:03:12,840 --> 00:03:19,800
And after these options and operations are complete and accepted, you can connect as the server name,

33
00:03:20,520 --> 00:03:30,300
backslash instance, name or server name, port or IP backslash instance name or IP port.