Good morning, friends, good day.
I will tell you how to grab the data of multiple variables in LabView and then we have to observe the
data using I'll be using things like application.
We can observe this data.
OK, so for that purpose, I just go to speak and over here you have to first login yourself back as
I login in this.
I already told you how to login in my previous video, then create a new channel or here this is my
new channel.
So let the name of this parameter.
Right now, I just used to barometer's and over here, this is temperature
and humidity,
guilty of my room.
So for that purpose, I use to feel so first.
When is my temperature?
And second one is my community.
So right now, this is and I just save this channel and over here there are two things.
First one is temperature.
Second one is.
So as you see, first I change the settings of my channel or check my settings.
You can also show your location.
Right now, I'm not using this.
Then go to the option.
Just select Clear Channel view with everyone and just go do it.
So this is my API for this case.
Now I just go to my view.
This is my block diagram window or here, just go to pick up.
Right.
Click and go to the communication.
And in this of protocols right now, I'm using SCDP flying protocol.
So just lock it up on this, get the data and close this.
Or you can use or here a simple error handler block also.
So just connect this connect client handle out client handle Herradura.
Just this after this, I go to my Bilu where because I read the data continuously, so in this case
I just go to my string over here, this is my concatenate string, then I just use the form texting
and I just create a constant over here and over here.
This is my AIPA request to write that.
I just copy this, go to do or have control.
So as earlier I said, this is my Gilady to speak English to do it.
And the very little right now I have multiple data, so just check it out.
I can grab the multiple data.
So this is my MPC.
I just close this or delete this and pull over here.
But this is interesting for me and I just copy this and feel one and put over here multiple.
So this is my end one and my format is in like it is impossible not to have.
Again, this is also in Libya like this in my data, I just copy this and also or here.
So this will get the rate of temperature.
This will get at the rate of humidity.
This is the format.
And over here I just use this and I just go to my friend panel.
And over here, this is my stream control.
And in this I just put the MPC API key.
So my MPC in this case.
Right, right.
Not read because I know I'm reading the data to the cloud, so I just copy this over here.
So this is my MPC, as you see.
And what here this is the temperature data and this is the humidity data for that purpose.
I just numeric and I using this random number and I just change it to Debian.
And the upper limit of temperature in the case of India is six degrees Celsius, maximum temperature
and the minimum temperature is like zero degrees Celsius.
OK, so I just connect this and for the community purposes I just copy this and I just connect this.
And in this case, this random number will generate a different number and this random number, different
number.
And the reality is that a hundred degrees, not up to a hundred maximum limits and lower limit is going
to be this is the humidity.
So I just connect this.
So right now the program is really for variables and or here this is the error because the stop button
is not created for the value.
Right now.
The program is ready and I just run it as a redundant button.
So as you see in the private view, the data is filtered so rare.
This is the data at six forty six, three seconds and it will updated.
Take some time, as you see there, it is updated, so temperature is around forty five degrees Celsius
and humidity is 78.
So I use would get for this.
So there is a numeric display.
I create a numeric display for the first one.
This is the temperature.
Temperature, and this is the parade and the unities degrees Celsius.
I just with this over here, you can see the temperature data and another numerical data for the humidity.
I just create and over here, I just selectively do so they say to the community, so as you see, the
data is created in the system and it is updated after every second, every 15 seconds, as you see,
647, six, 47, 15.
After 15 seconds, it will be updated.
It takes all the data from the lab.
There is no delay of data.
It will take the after every 15 minutes, 30 seconds.
It depends on your system or here.
This is the data.
As you see, 59 degrees Celsius and 52 is the parameter immunity.
So this is how you can grab the data of multiple variables, in my view, using things like thank you.