Good morning.
Today, I will tell you how to acquire digital signal using Ardino Mennel, so over here I have on board
firewalled and this is my gold.
I use these signals as zero and one one means five old and zero means OK.
And over here we have a disturbance.
As you see, these are my disturbance.
These are my analog.
So for that purpose, I just go to my makeup hub.
And over here, this is my blue box.
So first you have to interface, you are already know, using tools, maker, hub, Linux.
And from where we are, I already interface my heart in L.A., so I just go to my program.
So first you have to open your port and close your port and in between you have to operate.
This does.
Right now I use Reed, so I have to acquire the cell signal for that purpose.
I just connect this old school results and add up and over here you have to just select that board.
So in this case, my board is home six, as in my previous videos.
And over here you have to select the board rate.
The board rate is nine six double zero, and you have to just use a simple additive handler if there
is some error in your program.
So what continuous rating are they still now?
I just created by your board here and creative control.
So board here, mind which bin.
So this number is like this, the DL and over here is the value.
So I just create a square.
Allouni you read the signal.
You can edit this.
OK, so there's no signal.
So in this case, we acquired the signal.
OK, so I disconnect this value and when I hit the button, so right now I just go to the hardware part
or here I just check where is my cell phone?
So that is open is over here.
This is the X, so I just connect ground.
As you see right now, the signal is off and when I remove this and connect this.
So there is some matter in this case, you have to just select different pin because for days then you
have to select other pins, like in this case I just use this 2.5 and when I hit on one button and in
this case you have to just check.
Very disturbing.
Over here, this is my cell phone, so I just connect this one.
So right now, this is my favorite signal as you see this pennies on its own.
And when I remove this and connect this, the ground to this to the five right now, it is in connection.
So this is how you can acquire this signal using LabView with the help of Ardino men'll.
Thank you.