Good morning.
Today, I will tell you how to run a bomb using left you basically to run a simple motor like as you
see, this is a small fireball.
DC motor is in this pump.
So to run this pump, I require only five or so for this purpose.
I have a transistor as a switch, as you see over here.
I have it right after this one is my transistor.
And you see and this blast has collector and meter and base.
And on the base signal, I just give a signal from PIN number seven, as you see this one, and this
is my favorite red one and my DC motor, or you can see my pump is connected to the fireball.
Appositive is connected to the fireball and the ground is connected to the collector of šemeta and ground
of the motor is connected to the collector of the base.
OK, so and ground this one, this ground is connected to that and of the collector and the best signal
is coming from that base.
So here we have the program to write our signal.
So when I hit on that button, as you see right now, the switch is off and the pump is also so when
I don't run.
But as you see, the pump on the pump is off, the pump is on the pump is off, the pump is on.
So this is how you can use this to as a switch to run back motor.
Or you can see a small DC motor for high voltage DC motor.
We require relays of appropriate rating.
So this is how you can run a program or how you can run up from using Ardino Mega.
Thank you.