Hello, in the previous lessons, we already learned the theoretical information about the Delta passes,
and I already showed you what we have.
We have we FTL, AC drive in here, what we hear DP 12 is ECPA.
And in here what we hear, Dobi himI and the Delta Uster eight to four hundred.
What drive.
And they will do now practical applications for Delta.
But first of all, I will show you the himi connections and the connections to OK.
Now.
You you can focus to hear what you hear.
Let's make this camera a little bit.
Redouble our model is Dobbie time.
Six hundred and fifteen, so what is that E means in here?
You will say Internet connections.
We have an Internet connection and we have a USB connection for upload and download.
And the rest of all, we have come one and come to and country ports.
And in here we have twenty four world and you can see it is the left side.
Twenty four world and zero all underground.
OK, now we are communicating from here.
This is called one.
I will check.
Sorry, this is come to now, this has come to us and this is going on the this one is going one, OK?
This is country and we are come to we will communicate with two wire connection to wire means is four
hundred and eighty five communication and.
Were these two wires connected, these two, why it is connected to hear our pulses comm three communications.
Let's go to.
And let's check it.
This is our CPA.
OK, and in here, what we have come to report for the S.
E.
Appears.
OK, then these two wires, cable is connected to three Port of DBP, 12 is here and four others.
Four hundred and eighty five communication you will see in here.
I make it these purple cables, these two cables connected to come to port for DP 12 is E, then we
will communicate with these two wire and these two wire goes to here.
And then these two wires here comes to here.
And these two cables goes to our I think Ron drive OK to here and we want to communicate via come to
from the CPU.
From here.
I will show you again and we will right it wrong command and frequency command to our central drive.
But firstly, I will show you our Dobi himI usage and how can we connected?
We are Ethernet and VSP.
Let's start.
First of all, I will go to the soft software and I will create a new file and I will go to here and
I will select Dobbie six hundred and fifteen and I will say finish.
OK, now what we have at the screen and when I go to communication settings, you will see come on and
come to and country and internet communication because now we are communicating, we are quanto and
this is come to OK and we will communicate with the Delta products and develop serious p.l.c. because
12 is EDV Pistorius p.l.c. and then I will select for the interface.
I will arrest for under then eight to five.
OK, this is the first condition because of Y because remember we are communicating now.
Here from conta and to wire cabling, and I will say, OK, now this is the first thing and the second
thing and why and how can we applaud and download our projects?
And I will select Internet, OK, in here, you can see it and it is connected.
And I will say, OK, and now let's start firstly I will create a one button and this button will be
my mantra button.
And this is.
Momentary button, and this will activate.
Let's say, for example.
And zero and.
The stakes test and for the one condition, make it green.
From here on, OK and OK and.
You can say button pressed.
This is a zero, so let's send it to our himi how can we send it down a lot and scream if you are connecting?
We are Internet support or Internet communication.
Now it is searching the IP address and now it is.
Find it OK.
You will see.
Now this is.
Our himI plan, I will make it like this for you.
Now, I was sent this project to our himi now check the screen to screen.
Now it is downloading to the himI and then.
It is starting and starting.
Ethernet is initializing OK now.
Button pressed, a button pressed, button pressed why?
Because already, always it becomes the button pressed why?
Let's check once zero condition.
This is a zero by the way.
We can say to here, for example, and then another one and download the screen because previous screen
data already are used.
I remember M0 because of this.
Ah.
I mean it seems like this and I understand it.
Internet cannot be open.
This is another error.
Why?
First of all, we will check is this a momentary or maintain?
OK, this is momentary.
It doesn't matter now.
We should send this.
To me, but if gives an error, again, we need to close the power supply of our himi and we need to
give up power again.
OK.
Internet can be opened.
We need to do 24 volt.
We need to make it off and on.
Just let me make it.
And.
Let's cut to a fault.
And then.
Now, Hymies preopening again.
Now, let's try once.
And maybe we can add here one indicator, state indicator like this and make it.
From here, not the standard, it should be around, OK, and make it others too similar like Amy Tan,
OK.
Um, uh, let's send.
We are Ethernet port.
This is another one problem after you send the project, we need to close and we need to open.
Hi, me again.
Why?
Because Internet option or Internet communication must be initialized each time.
And now our screen data is send it to himI and we are waiting to opening the himI and it is opening
Ethernet initializing.
Now, OK, you can see from here what will happen now I will press.
You can see I pressed and Green and Button is pressed and released and OK, and so imagine why this
is not changing, because this is zero condition is gray and one condition is gray.
If I say too green for one condition like this, it will be green also.
But let's try once to Santa data.
Um, it will find I mean, again, it can give and same error, but no, OK, it's standard.
And receiving data and OK, it's correct.
We need to wait a little bit more and I will press.
OK, you can see them all from here.
And Britney Spears.
OK, and OK, now, what will happen if I pull back this come to.
Cable from here, if I.
Disconnected.
From here, what will happen now?
Now it started what it started, you will see in here.
Come to Station one communication error, if you see this error on your himi, I will make it bigger
if you see this error.
So there is a problem between your himI settings and the cabling.
OK, now imagine you put it back to correct position.
Now, I put it back my cable to the himi now error is gone.
This is the second important thing for me.
And now let's connect to KPR.
So how will I connect to my CPA?
I will disconnect my Internet cable from the HIMI.
And now.
I will put it to him.
OK.
Now it's connected to C.P.U and let's go to a piece of.
And this create a new project.
OK, this is E, this is our Sepehr and I will go to here and I will open my computer and I will check
once my communication settings.
Now driver properties will be selected, our Internet cart driver and I will say all delay and I will
say again, search.
You need to search like this.
This is the first thing and it will find it OK, and then you need to be the same IP address range in
your projects, for example.
I need to go my.
Here and here, and I will select my local connection and I will go to Internet Protocol, uh, TCP,
IP v4 and this is check once one point fifty.
And my C.P.U address is.
One point five, so one hundred and ninety two point one hundred and sixty eight point one should be
similar to last year.
A number must be different between your p.l.c. and PC for your true and correct connection.
And I will say, OK, and I will close it and I will say OK, and close and close.
Now let's open command.
And then let's start to ping one hundred and ninety two point one hundred sixty eight point one point
five, that's ping it.
And then you can see we have communication between my PC and people say, OK, between my PC Ethernet
port.
And I say, this is true connection and let's start to open project and new project.
And this should be imagine it's a little diagram and what will happen.
Let's take a look.
Helda, let's put your, um, tan from the himi from behind me, and we will activate out um eleven.
OK, now go online to our CPU and this, this is not started.
Why.
Because we need to go to communication settings and this is driver too and this is work and this is
OK and let's check once to send it and ok it is sending out and I want to go back to Running State.
Uh, I will go on line to this and let's start again.
I will make it bigger.
This is our himI.
OK.
And you can see it now check here.
OK, check here.
Now what we hear we hear from the himI, OK, you can see it is connected.
So what we adopted we adopted our himi our CPU and the connections between the himI and between the
CPU and we adopted our IP address range and everything.
Undescended and Dopp solved file to our himi dopey himi via Ethernet.
Now I'm finished for this video.
Next video we will we will check once to.
Our step driver, OK?
And I can show you like this are I think Ron Drive, we will come and get the communication and screwdriver
that we are going to run with the server.
And we have a subtle motor in here.
And also we here in here Stepper Motor Drive, and we will do complete applications about the Delta.
And at the end we have a gift.
We will communicate with the screwdriver can open and we can open basics.
Also, I am finished for this video.
See you in the next video.