Hello, in this video, we are going to learn the FTL Akron Motor Drive, and this is our we FTL drive
and what we hear we have in here.
Let's make it bigger, a little bit more for you.
We have here potentially potential metaphor for the drive speed.
And in here we have control terminals, OK?
And this device for the communication is four hundred and eighty five connection.
And in here we have two switches.
Let's go there and let's take a little bit more closer.
OK, you can see the in here.
So these are relay contacts and 24 volt and this is M I want an M I three and two and four and five.
These are the control inputs and we have ten volt and what we have the rest of all Abia.
I am a f m not ACM.
So these are all completely explained in our manual.
I will go down a little bit more and we will take a look once to one by one.
OK, first of all, you can see in here our connections and this is for the factory default connections.
If I put 24 to M, I want from here you can see digital signal come on command and DCM is here and from
here and m I want its forward and stop and šemeta is reverse and stop inputs for these vds and what
we have the rest of all, we will take a look once from here.
OK Alii analog voltage input.
OK, this is analog voltage comes from V and RF and analog output matter in here and Asia.
Analog control signal for it is a common input and ten volt is plus potential metered power supply.
And rest of all, what we have the context and we can see them all in here are A and R, B and RC.
These are our asynchronous drive inputs.
The rest of all we have in here are an S and P, so our drive is Monifa.
So two hundred and twenty volt AC is connected to cable is connected to here and in here we have U,
V and W these three output is for the motors and we will put motor to this output U, V and W and our
motor will be controlled.
Our have this ok.
The rest of all what we have in here, let's make it a little bit more clear.
I will try it.
For you.
Not OK.
A little bit more try.
Doesn't matter, make it bigger.
And the this is our Ron.
OK, and this is our stop, OK?
The red one, and here we can increase for cancer and we can decrease and for cancer and we can go up
or down with these two, um, these two button.
And in here we have multipotent and this is enter.
So it's OK button.
And then let's try once to reset to factories that this we have this and also for Delta Wafty.
If I press mode we will say uh we will see H and A and you and forward and frequency.
So from here we can see the output frequency and how many amper pulls on part of our motor.
We will go a little bit more and this is our voltage and it's forward or reverse and the turning direction
of the motor and our set point frequency.
So let's go to our menu firstly.
And I will go to parameters first and let's go.
Also, we can see them all in here, how to operate the digital carpet, but it doesn't matter.
I will go down and down and down in here.
Perimeter reset.
So what will happen?
For example, I will go to Mode and I will say enter.
And it is perimeter zero.
Now we are in zero and with the up.
But I will go to two point zero zero, so two point zero zero is three now, and I will go to two point
zero zero now of first muster for command is selected as four hundred and eighty five communication.
And if I go to here and I go zero zero point zero two and again mode and again mode and I will go down
and zero zero and I will go up and one more up.
OK, this is not zero and I will reset the whole parameters to factory settings according to 50 heads.
OK, and I will make it.
And I will say, OK, now it's ended now.
It is 50 years and now it is factory revisited and you can hear maybe the fun is working.
OK, then while the fun is working, let's go to fun parameter in here.
I will put here.
Fun, fun is always on why?
Because parameter three point eight is zero.
I will go to parameter three point.
Eight.
OK, you can see now it's zero, and I will say if the AC motor drives runs, then that moment should
be on and I will make it to no one stopped and I will go back.
Now, it's 50 years and we already saw two point zero zero three.
But now you can see two point zero zero is.
Zero.
OK, this is the introduction of the Delta V and the FTL series, and in the next video we will adopt,
uh, four see this potential amateur and with these buttons up and down and also we will use, um,
we will learn acceleration and deceleration times and etc..
I have finished for this video.
See you in the next video.
OK, see you.