Hello, in this tutorial, let us meet with the ASPCA to try OK, from the Delta and this is my screwdriver
and in here we have the buttons, molds and for the adopt our parameters, OK?
And on this side of the right, you will see at this point C and five, OK, I C and one for additional
inputs and outputs and also siento.
OK, this is for this uh encoder input of my screwdriver and in here, OK, you will see an open communication
port and at this point three and four and C and three this season three is done this gadget.
OK, this is for the serial communication and this is my USB connection.
And at this point you will see my answer is CPU and via Ethernet port.
OK, we will connect with this p.l.c. and then and the right side.
OK, you will see at this point I will go close a little bit more for you.
This is my can open communication port.
OK, uh, let's check.
Adopt this yellow cable, internet cable.
OK, you will see now can high, can low and that one short or bridge, OK, at this point, the brown
cable it is and register.
I made a short circuit at that because of the need to put here and register and 120 ohm now active.
OK, and three cables enter it at this point you will see.
OK can I can and ok and then can use.
Um let's go a little bit more.
The black is too high, blue is low and the white is grant.
OK and now I will go here.
I will pull it.
OK, this is my Ethernet cable also and also we can use it as can open cable.
OK, at this point you will see from this side OK to the right side if you look it like that, ok.
One is you will see black and the two is blue and three is.
White, OK, like that, and I will put it to CNN, uh, six, the first input, OK, four and six putting
OK now where is my and register of my can open this one.
OK, also for this I will pull it.
I need to or you need to wait here one hundred twenty ohm resistor, OK, where I going to put it,
I will put it to you here.
OK, the second input of can open because this is the first.
And also we have just one drug in my system.
Because of this, you need to put 120 on to your RG forty five check and this is the one and two inputs.
OK, like that.
OK, let's put it to here.
I will adapt it.
Again.
OK.
Now it is.
OK, I put it to here.
OK, so now my system and my configuration is really what we are going to do.
We are this cable, internet, cable, just cable can hide and lowenkron, we will communicate with
this p.l.c. to this drug.
And my promoter will turn according to my commands for this tutorial.
I am finished here.
See you in the next tutorials.