1 00:00:12,290 --> 00:00:15,730 Hello, in this tutorial, we will continue with the site. 2 00:00:15,770 --> 00:00:18,560 But first of all, I will show you one more thing. 3 00:00:18,740 --> 00:00:20,890 This is 10 seats connection. 4 00:00:20,930 --> 00:00:21,910 One, two, three, four. 5 00:00:21,920 --> 00:00:26,170 OK, and then the next, uh, ping starts with the nine. 6 00:00:26,330 --> 00:00:33,170 OK, you can check the pin number ten high is one and nine, Kanavis two and, uh, ten and ten grand 7 00:00:33,170 --> 00:00:34,200 is three and eleven. 8 00:00:34,220 --> 00:00:37,370 OK, you can check this, uh, pin out also. 9 00:00:37,520 --> 00:00:43,610 And now I will right here, for example, can open a test. 10 00:00:44,570 --> 00:00:52,730 And then this is a service controller and the type is this one, and I will say just OK, and then what 11 00:00:52,730 --> 00:00:53,370 are you going to do? 12 00:00:53,570 --> 00:00:57,580 We're going to do, uh, we're going to create a bond program, OK? 13 00:00:57,590 --> 00:00:58,690 And program area. 14 00:00:58,700 --> 00:00:58,970 Right. 15 00:00:58,970 --> 00:01:01,960 Click and new and the program zero. 16 00:01:01,970 --> 00:01:03,720 It's a little diagram is OK. 17 00:01:04,040 --> 00:01:07,610 And first of all, we will, uh, do one more thing. 18 00:01:08,510 --> 00:01:12,970 We will start with the initialization of the ten line. 19 00:01:13,160 --> 00:01:21,680 But we did a factory set to our server and we need to do and hardware configuration of our policy. 20 00:01:21,800 --> 00:01:26,030 First of all, it's the hardware configuration of our Kalsi. 21 00:01:26,390 --> 00:01:30,610 We need, uh, h w config software. 22 00:01:30,800 --> 00:01:39,500 And at this point we will go, uh, we will go to an open area and we will select our spatial driver. 23 00:01:39,690 --> 00:01:46,190 OK, we need to adapt our moderate and the address and everything and we will send it to p.l.c.. 24 00:01:46,190 --> 00:01:55,160 OK, this is our this is our hardware configuration and we need to go to set can uh, also now let's 25 00:01:55,160 --> 00:01:59,240 take a look set can part working mode we can select from here or left. 26 00:01:59,240 --> 00:01:59,840 Click to here. 27 00:01:59,840 --> 00:02:06,920 OK, and now in general area we need to go to building telecommunication and we need to select the spatial 28 00:02:06,920 --> 00:02:07,460 driver. 29 00:02:07,610 --> 00:02:10,300 OK, and as remote OK. 30 00:02:10,550 --> 00:02:12,210 And transport node I.D.. 31 00:02:12,290 --> 00:02:15,320 OK one and this can be OK. 32 00:02:15,350 --> 00:02:20,090 And then for example in here I will select this five hundred k ok. 33 00:02:20,270 --> 00:02:22,570 This is my can betray ok. 34 00:02:22,940 --> 00:02:26,120 And these are all can believe it like that. 35 00:02:27,010 --> 00:02:34,250 OK, and I will close it, I will just drill down on it, but first of all, we need to open our are 36 00:02:34,300 --> 00:02:35,770 OK income. 37 00:02:36,520 --> 00:02:39,510 We need to what we need to do Ethernet port, OK. 38 00:02:39,760 --> 00:02:45,310 And this was I will search, but the Internet is disconnected, so we need to go to. 39 00:02:47,700 --> 00:02:51,280 OK, this one, and I'm just looking. 40 00:02:51,300 --> 00:02:53,620 Is it connected or not, my Ethernet cable. 41 00:02:54,720 --> 00:03:00,690 OK, now it is connected and for the site checking, OK. 42 00:03:01,260 --> 00:03:02,680 This site is also connected. 43 00:03:02,700 --> 00:03:03,150 OK. 44 00:03:03,450 --> 00:03:05,160 And I will search it. 45 00:03:05,160 --> 00:03:06,030 And it is searching. 46 00:03:08,550 --> 00:03:15,020 And OK, now, driver three is active and I will say just save driver, OK, we need to close it. 47 00:03:15,030 --> 00:03:15,400 Why? 48 00:03:15,720 --> 00:03:17,700 I will just save it, OK? 49 00:03:18,180 --> 00:03:19,520 And I will close it. 50 00:03:19,530 --> 00:03:19,860 Why? 51 00:03:20,220 --> 00:03:26,220 Because in my, uh, program, OK, we need to select as communication settings. 52 00:03:26,220 --> 00:03:26,600 OK. 53 00:03:26,970 --> 00:03:31,470 Driver three OK, this is now selectable and HSW config again. 54 00:03:33,080 --> 00:03:34,640 And it is opening. 55 00:03:38,110 --> 00:03:40,950 Just focus and follow step by step. 56 00:03:44,240 --> 00:03:48,600 When we try to do a download, it will be the driver because of a closet. 57 00:03:48,620 --> 00:03:51,530 OK, and left click again to this CPU. 58 00:03:51,740 --> 00:03:53,980 OK, one and five hundred K. 59 00:03:54,020 --> 00:03:59,420 OK, now I will just do a download this system settings to my p.l.c.. 60 00:04:00,970 --> 00:04:07,960 Now it is downloading and I will say just yes and I will say yes, OK, this is downloaded and I will 61 00:04:07,960 --> 00:04:09,940 say, just say and I will close it. 62 00:04:10,010 --> 00:04:13,530 OK, now the site is OK. 63 00:04:13,720 --> 00:04:19,830 And what we need to do, we need to do similar adaptations for self-drive site. 64 00:04:19,840 --> 00:04:21,370 OK, for this tutorial. 65 00:04:21,370 --> 00:04:22,180 I finished it. 66 00:04:22,330 --> 00:04:23,860 See you in the next tutorial.