Hello in the studio, we will just take a look, one application example about the Omron C.P.U or Omron
classes between Delta Ehteshami, first of all.
And if you look to here, you will see wafty and p.l.c. sites are different and the yellow ones for
the safety and the blue ones for the PLCC.
So what you have, I will go to directly to communications settings and then we will see communication.
Two and three is used for the communication, but now focus to hear communication.
Two or two is used for the communication with Omron C.P.U, Ambrosi or CPM or C QM series.
OK, then you can see select and other separate types from here and communication part or confort three
is used for the modules.
Are you hakes address communication as master and at this point you will see under 408 five is communication
used for the communicate with the HMG between 50 and p.l.c..
OK four come to arrest 232 I am sorry.
Between HMG and p.l.c. the arrest 232 communication.
You stand for contri between HMG and Wafty you will see Rs 485 five communication is used.
This is just an application example to give you a details about how can we write from the HMRC to Wafty
at this point you will see the first word.
This is a word left click to here.
You will see this is a data type is virt and the minimum and the maximum numbers and integer digits,
three and fractional after the point.
Just one digit is led by the.
Programmer.
OK, or you can say to here, for example, on this that will be disappeared and then the address is
read and write two hundred and eighty.
So this is the world of Omron or this is the word of wafty.
How can I explain into the void?
We have a parameters, OK, which parameters Modarres parameters.
And at this point for the V if Morbus parameter address is two hundred and eighty and three, you will
see at this point Langtry one read and write two hundred and eighty and two hundred and eight.
One and two and three.
From here you can see and four.
So what does that mean.
This is the first 50 OK.
In our system we have 450.
So for this you will see this point.
This is two, you can see you can change this point to here.
For example, if we want to write to 1750 like that, we can change it.
OK, and I will write here, too.
And second and third, we have to add 450.
And also I want to read from the Kelcy.
So from this you will see we are data markers, for example, data MERKER one.
OK, this is my p.l.c. address is zero.
How can I know we've got the communication settings.
OK, that you will see p.l.c. station addresses zero.
You can see from here and we are reading from the or we are writing to see it data.
Merker one hundred link to zero and link to zero again.
D.M. or data.
Merker One hundred and one, two and three and four.
And this point we are continuing 10 and 11 and 12 and 20 and 30.
And also we are writing to address and this address also we are reading from this address left click
to here.
You will see this is numeric entry.
So we are writing, we are this a numeric entry area and then this data is sending to p.l.c. to data.
MERKER One hundred and thirty, that's all.
So what we learned or what I am trying to teach to you, if you want to communicate with the Omron p.l.c.
with Delta HMG and also if you want to write to Omron VTE, we are Delta HMG.
You can use these options.
Option one, OK, for the two, you can communicate with the p.l.c. and also with the three you can
write to Wafty with art.
You hakes address master method or protocol or selection.
I mean the communication method.
OK, that's all.
And that you will see this just an addressing here.
Slave for slave trade, slave to a slave one.
At this point you will see the modules addresses.
This is the address, one address to address and address four.
And that's all this is just the basics and application example about communication and modules and between
Delta and Omron.
So for this tutorial, I am finished here.
If you strike at any point, you can ask me a question immediately.
See you in the next tutorial.