Hello.
In this tutorial, we will learn how can we go online to our TV?
We have this soft software.
First of all, we need to go to here.
You can see this is offline.
I will click here and then communications set up settings are appearing and then we need to select import
is for why?
Because of our device manager is.
A sign is compact for you will see it first thing, this is really important.
Sorry.
And we need to go device manager.
And then you will see here this is come forward, OK?
This is going forward and then we are going to communicate via USB key and nine thousand six hundred
seven, even one.
These are the parameters into the video also.
OK, let's go here, and let's check here our parameters.
Nine We assigned remember, uh, the previous lecture.
These parameters nine parameters are was nine thousand six hundred ninety seven.
Even one.
OK, now we can test if the everything is successfully.
Connected all cabling and the whole parameters into the video is correct, and these parameters are
both rate and protocol is same with 250.
These must be green.
Let's test it.
And it is.
Trying to go line, connecting to our rain, right?
OK, let's take a look once.
What is a problem or is there any problem?
I'm looking at searching.
OK.
But I will close it and I will taste once.
OK, now you will see if I.
Chris, at first what I did, I just fixed some cables, OK, after I press the test, you will see
this is green again or fly.
And these are the same with the BFD and test.
And it is green.
So now we are online with the reactor and you will see at this point, my WiFi features my view.
If this type is VTi-L, version one point twelve is kilowatt is 1.5 and rated voltage and rated current
is here, OK?
Darren, we get everything and then in here you will see the software interface, the file.
And we can open a file drive parameter, quick setup and advanced.
We will take a look at them one by one.
Diagnostics keep it trend and the PD control engineer diagnostics and the options.
We can set the options from here and the help.
First of all, we can go to quick setup.
OK, then lots parameter settings from drive and I will say OK and click set up into the quick setup.
What will happen?
We will adopt our system.
What startup display selection OK in random drive is open?
Which data is going to be shown us on the carpet?
I want to see her can see or I want to see Trick NC or I want to see current or I want to see content
of user defined unit, or I want to see forward and reverse command.
Then normally, freakers is OK for us and content of the multifunction display is here.
You will see a selected area.
OK, then zero point zero four is remember we read it from the we serial communication.
And then at this point you will see these are the user defined coefficient K and moderated current model.
No light current.
And this is, I guess, not correct, but we will check it OK.
And next step?
You will see the maximum output frequency, maximum voltage frequency, then we can change them all
at this point, OK?
Maybe let's change it at this point.
For example, let's take a look what's one point four altogether?
And I will go here.
Just a test, is it running or not?
OK.
This is ton midpoint voltage, I will put it to is 11, OK?
And this is again, I'm going to change it to, for example, one point ninety.
OK.
These are changed and done it here.
I will change it to two hertz.
Uh, yes.
OK.
I'm sorry.
Next, I will say, OK, I said.
Right, and then it is gone and step two, what we have, this will be true and this will be 12 OK and
ten or twelve point five?
OK.
And next step, then source of force frequency command and source of operational command is the role
that we defined before we can change the mode fault indication of my multifunction output relay and
turn as input and output.
These are OK multistep and these are all that we defined.
OK.
And then I will say, OK, this set up and then let's go to.
We have tea and one point three, now you will see two and then twelve point five.
OK, what happened?
We did a quick setup and then after this quick setup is applied to the FDA and all doctors are written
into the FDA, OK?
This is how can we use Creech set up first thing with the realities of what is happening.
It is reading whole parameters from the VTi.
And after we read from the FDA, we can see whole parameters and we can't change anything what we want
and then we can finish, OK?
You will see the digital input terminals and output terminals and everything.
The quick setup aren't finished for this tutorial.
See you in the next tutorial!