Hello.
In this tutorial, we will learn how to use parameter S. I will go parameter, OK, and then drive and
file.
The first thing I will select it, right?
OK.
And I want to read from the drive dry.
OK?
And it is reading whole parameters from the drive.
And normally we already learned the set up some basic parameters, but now we are reading everything
about the right.
OK?
And then you will set each parameters are is written into this file and then you will see completely.
It is written to here.
Then you will see here.
If you want to modify this parameter, we can change it, for example, acceleration and deceleration
time.
OK, let's check it with our real and existing try.
And then let's go to one point.
Let's go for the simulation and celebration time.
And now this is done.
Also, you can see this 10 is here.
Installation time one and I will make it, for example, ten point eight, OK, and I will change it
to, for example.
Twelve second, I will change it to three three second.
Update and then Rido and I will say, OK, then all of them is written into the VTi.
Now it is saving.
You can see it is safe and safe and safe, and hold parameters are written into the safety parameter
eight and nine and then turn.
It's almost finished and grading parameter from the drive.
OK.
All parameters are reading.
OK, and then let's go to one point nine.
This is 12.
OK.
And that is three.
So this is correct.
And then what we have for this area, for the parameter management, what is the important point?
You can see whole parameters, whole parameters that you can adopt at this point, OK?
This is the first thing.
And then you can do one more thing.
This is really important, OK?
You can read from the drive.
Imagine you want to get a backup from your drive and you are reading complete parameter from the drive.
And then we will do one more thing, OK?
And then you will get a backup of your device drive at this point with the parameter management.
And I'm going to save this file, OK, table from drive and I will say, OK, it's tasty or CSP, I
will say, is take the file, OK and to my desktop.
OK, Delta dry and backup.
OK?
And it is.
Say, and you can say now the file and file and say to file that we can read from the file, OK, it
appears read file, you will see Delta drive back up.
OK, we can read from here or.
I can say to hear such drive back up, OK?
The Delta Drive back up, I will open it, you will see whole parameters are written into text at this
point.
All of them, you will see it OK, right?
Well.
And the default ones and also you will see default values into the data.
What's changed and the minimum and the maximum attribute.
Also, I want to show it to you.
Normally, default this rate at current one point six, but it's changed to seven point five.
Like that?
OK?
You will see what's changed on your drive according to default.
OK.
The parameter management is really important for us to the this.
So I, uh, I guess we already learned a lot of things with the parameter management.
How can we get the back up?
How can we read from the backup?
Also, I will show it to you.
I will say exit and parameter again and the file and read file and then this one.
OK.
The read file is here, and then we can say, right, all to verify.
That's all for this tutorial.
I'm finished here.
See you in the next tutorial!