Hello.
In this tutorial, we will see an example about the communication between Doby, HMRC and Omron.
We one thousand the right.
In here, you will see the frequency and you are reading output frequency, output, current and output
power and forward and backward buttons are here.
So here you will see the station number is one of the VFD and the communication settings, or protocol
is nine thousand six hundred eight and one.
And here are the parameters.
So how it is running normally under the frequency settings input, you will see Ember two.
This is the mode bus communication address of the Omron WI one thousand drive, OK, for example.
Forward button Let's analyze it here.
You can see the right address.
This is the internal memory of the top soft.
OK?
This is internal memory peak.
But if you go to macro section, then you will see a bit of an 0.1 0.1.
Is this reverse so diverse?
He's followed forward.
This octave done reverses this actuator, but this is not also the motor's communication.
Forward settings If you go to macro and if you go to on macro, then you will see the link to then invert
one.
OK.
We are writing to invert.
One is one.
One is the forward and this is the settings of the V 1000, right?
OK, this is important point for the most mass communication.
This is the address.
If right into invert, one is one that it is turning forward and also off macro and this of what's happening,
we are writing zero to invert one.
So there I was stopping and for the reverse, let's take a look once this is also the same mother,
OK, emit one into intimate one.
We are writing two, then this is backward and off macro.
This is zero stopping VFD or that that's all OK.
And we are here and we're thirty six and thirty eight and thirty nine ultra can see current power they
can see on the HMRC.
This is the application.
Monitoring and this is this gives you an idea idea, how can we communicate with HMRC directly to the
FDA and we will do and a lot of examples about it, and we will show you, how can we do it with another
drive?
Also, I finished for this tutorial.
If you have a question, you can ask me immediately and see you Infinix's tutorials.