Hello.
In this tutorial, we will learn a timer, OK?
Normally, while we are working with the timers what we were doing, we are writing a timer and timer
zero.
And for example.
Just one second timer, OK?
Then the contact is on or condition is on.
This timer is counting.
And the time passed after one second.
We can get the time.
Zero contact is on.
But now if we work with the contact type timer eight timer, how can we work it?
OK.
If you come to here and you're right here, for example, let's start with the eight timer instructions,
definition eight timer, then a meaning is this is a contact type timer.
OK, this is the first thing.
And timer five, this is my example timer.
And the time is going to be two seconds.
OK, then now you will see a timer is defined to here.
And when the condition is on before a timer.
OK, let's define here a condition, for example, L.D. and 50.
And then a timer, for example, timer five and Kate, 20.
Then we will get an output by four.
OK, then let's make online to this simulator.
Don't want this project to the simulator and say yes and say yes again.
OK, very good.
If anybody is active, this timer is counting.
After two seconds, we can get an output.
But if this is off, this is zero.
OK, this is on.
This is off, OK?
When the condition is on, you can put a delay to your before your output.
You can put a delay with the eight timer.
I'm just looking at.
And this is the first thing that came to my mind.
A timer can be useful for the delays before the output.
OK, if this is active after two seconds, this output will be active, OK, let's try once more.
This is active contact.
This is giving a contact to here.
OK, that's OK.
And then set off and set on.
OK.
You will see.
And easily when you are working with the timer, you can think, OK, what is the difference between
the timer, OK?
And you can just say.
L.D. AM 51, a game timer, for example, imagine this is six times or six and 20, and then you can
do it here again.
Timer six Aldy.
This is the contact of the timer six.
And then output wise, six.
Stand by.
Four is used.
And we can see why.
Five.
OK, then again, let's go on line.
What happened?
We used to line this line is first one.
This is the second one.
The similar thing, this is active.
After two seconds, we have an output.
But here we are just using one line.
This is the contact type timer.
And we have a notebook.
So you can use this method or this method, OK?
But we need to know a timer is another one instruction and it is useful.
And we can use it into our programs easily like that.
OK.
For this tutorial, I'm finished here.
See you.
Internet audio.