It start to create a new project, and I will say to hear coaM and Kelsie and sell it is policy type
speak to this is correct.
And I will say, OK, this is the first thing and I will go to com G.R. and then we will add up our
communication parameters, OK.
And let's go to a communication chart from here.
I am left click.
Then we need to work with the serial port because on the TVP 28 is we this series has not Ethernet port,
OK?
Because of that, I'm going to use this serial port.
But where can I see it?
If you go to device management, when you put your Wisby cable to address 232 converter at the common
LPT area, you will see your serial is found on communications six compart six, OK.
And this is composites and drivers say one is ready for me.
And you will see it's found TV to be.
Very good.
And if I go to PeopleSoft and the communication, you will see transfer set up and then you can select
comm six from just only six.
It's a law then, because it's found that you can select OK, say OK.
And that the communication model, you can take your TLC program to PC or from PC to policy and another
to option.
It doesn't matter for me for a moment.
We can get a program from the policy to PC.
Now, I will say, OK, we can set Dossett device commentated and we can synchronize the project and
the Supersport, but it doesn't matter.
I just want to see device comment if there is a program into my real policy.
And I will say just.
Yes.
Say to anybody to my.
Computer, and then it's detecting the communication port now.
Um, it's already found it, but let's go to Commager once more.
It's on the left.
Click to here refresh and to detect.
OK, I'm selecting how to detect and we will find it.
Just I will disconnect from that.
It is processing.
OK, now detecting is successful, it is important.
I will go here and I will say transverse set up.
And again, I will just say, OK.
Then it is still looking, I will say, disconnect.
OK, very good.
And what can we do into here?
Communication settings?
You can see again, the similar things.
If I left, click to hear autodidactic.
It will detect once more.
But we need to wait a little bit more because is funded into PeopleSoft.
It needs to fund fine come six and seven, even want nine thousand six hundred.
OK.
And we need to wait a little bit more.
And almost.
And it is not detecting why.
OK, I will say just seven and one and one and the station address, I will say zero, and this is my
Rs 232.
This is my communication method.
And Usque, OK.
And six just only one compare.
And again, I will say how to detect.
And it's funded, OK.
Result of the detecting, you will see the PLCC funded.
And my computer comport and mode and the protocol nine thousand six hundred seven even one.
And I will say, Carlos, why it's followed immediately because I changed station address, because
already I saw into here into my computer it was zero, OK.
But when he when I checked here, it was one because of that, I made it zero.
And I will say, OK, now then we can go online to Pessina.
OK.
And I will say yes, from the PC to play this empty project is.
We need to wait a little bit more because it's sending very slowly.
And when this program is, send it to PLCC.
But now, sorry, sorry for that, because of what we already defined this program, DeeVee, P. Zero.
You will see from here, OK, because of that.
It is sending a project, but which project it's already uploaded or not?
We're going to see to it that little bit more because of to see what's happened.
And the important thing, why it is sending so slowly, because we are working with the cable serial
cable.
If the program or project is too big and if there is a command and it is sending slowly like that,
OK, because of the.
I mean it the way already I can show to you, for example, we can go to trade, come and I will.
It up my system.
And I will say start.
Into here, you will see on the policy side, artists 232 Alette is flashing.
OK, then Iris 232 communication is running out.
Then already with the computer monitor, you can see 64 percent.
And also here it is running.
My policy is not in the wrong situation because of why my run and stop switch is at the stop position.
OK, from here we go gave forward and from that artist to 485 communication area, we will communicate
plus and minus signs.
OK, helos and it's minus.
And the next things of the policy, you will see this as be two percent transistor outputs.
And we can.
Use high speed output, pulse outputs with this kelcey, OK, and I will say stop my communication with
the camera.
Then 95, 96, and it will be finished almost.
OK.
And if I go to leather like drum.
OK.
It is empty.
OK, you will see.
And it's stopped.
I will change the switch position with my and manually then policy is stop and done.
If I make it run from the software, then it is run situation.
Not very good.
This is a first thing.
Then we are on line to policy now and my policy is stopped again.
Why?
I will say it.
Run but stop.
Because of what?
OK, first thing into policy, we must put here a cult like.
Let's start Aldy, for example, in one thousand.
OK.
And it's output time.
If the project area, if the little diagram area is empty, then it is not going to run.
So the need to download this from PC to kill this project.
OK, then this is standard to place it.
And now if I go online.
And it is stopped.
If I say Ron.
Then it will be run and it is not going to be stopped because of why we had a project or we have a program
into the palace, OK?
This is the first thing that now we can finish this tutorial at this point into next material.
We will start right the cuts one by one.
See you into next tutorial.