The next time that we going to consider here is the most optimal, right, so we have an easier time
based Vostok morality, and we'll be understanding how to utilize them in a Cold War, right?
So we already have the did did fundamental design here utilizing the PCL script that we've been utilizing
from the starting off course, right?
So we'll go ahead and try to look for just WTT.
And here we have our exciting base version of To The Like now just to.
Quickly, you the functionality of it, so we could just go to the say time based short timer product.
OK, so in know watchdog operation, the WD G time out in double is configured by parameter to be curious
to weight of a WTT clock cycle race where weight of the WTT parameter is any integer ranging from eight
to 31 when the WTT interval is set at co-generation time data.
Whenever we add an IP at that instance, the victims set and that cannot be modified dynamically through
control registers.
OK, so this is something an important point to note that we could not modify the victor0000 parameter
as we set at the time of completion of rate, and the delay calculation will be very simple.
So for example, if you go ahead and double click on an IP, so the only parameter that you get for
a configuration is the vector of the Vostok primary.
So that now with this drama, 31 and the default Vic is set to be 30.
Right?
So with this, we are able to get the delay of around two weeks to 30 and then each clock is off duration
10 nanosecond rate.
So this if you just multiply, you'll be getting around ten point seven three seven, so will be getting
a delay of 11 second, right.
So how we calculate a clock is basically the clock that we are feeding to our watchdog timer, right?
So it is the clock out of our clocking with our clock, with our IP run said.
Then.
Hundred make higher rates on their meager two two one zero zero and then E six rate.
So if you just calculate this, it will be one E race two minus eight.
And if you just multiply this by 10, so it will be eda's to my nest egg.
So this give us an A..
Right.
So this is how we will be calculating the average subject that you sit here who to study.
So to raise to 30.
OK, and then multiply by the clock period, we just steyn e minus.
And then that way you'll be getting the delay that you get.
Finally, rain washed off Chimerix.
Right.
So this will be 11 seconds so that this what we're going to do is we're keeping our default setting.
There is 30 and we just performa connection automation, right?
So this will automatically connect our washed up timer IP to people utilizing the same techniques to
what was that incident.
What are we going to do is we will be generating energy wrapper.
So right click on the blog design and generate any still wrapper for our blog.
So one sage gel wrapper is ready.
Since all the pools have been already mapped, their respective pin that is this clock reset and USB
port are already mapped their respective pin.
We go ahead and read the bits, right?
So once generation is the successful will be exporting and hardware fighting to right this way will
be discussing the whole of how you utilize it in full.