So let us try to understand and diagnose Fima, focusing on what will be the top that we'll be covering
in each and every section and what will be our agenda straight.
So first section will be predominantly devoted on IED rates.
Here we will be choosing the specific version of what we do to install on your PC and along with all
the necessary tools which are required for following the course, right?
So this section immediately goes on an IED and how we install the devices and the tools so that we could
get started working with the signal processing system, right?
The next section where we'll be checking with the tools that we install are correctly operating right,
and we also able to verify with the entire flow on the hardware, right?
So the second section will be entirely to understand or just to get an overview of an entire design
flow, OK that we follow when we walk around with thing.
The first fuel we use will be blindly following an entire process and then will be pulling up our fundamental
logic behind following specific steps.
The third section will be working on a simple peripheral, so we divide up into three categories, so
we call simple, papery, intermediate and complex third.
So the difference between these three things are very simple for a simple.
If it is, we do not need to do much.
So we just need to set up directions and then directly start sending the data.
But then we considered an intermediate preference.
We need to specify the types of an operation.
So along with the type of operation, we also need to set the rate at which we will be sending up the
data and then we set the date, right?
So this is the difference that we have between simple and intermediate throughput when we consider a
complex throughput.
So even to set the operating condition, we need to calculate certain parameters.
So this is I will be building up our complexity when we consider really simple things that as you will
be immediately focusing on and GPI, each benefit could be.
Accessing our zinc processing system in a 3V, so we have an email e-mail and the E, hey, so we will
be understanding each of this in a greater detail when we poke around with the GPA.
Then we proceed with then you what?
OK, so you are also could be axe's in 3B by zinc processing system, so it could be the ABN Amro e-mail
and so it will be billing of distracted use of accessing.
You are by all of this matter and then the sum of popularizer that we have with a new great and along
with the fundamentals of that.
The next section, the Section five will be predominantly working on the time right does are frequently
delays and you'll be finding them in the various scenarios, right?
So we do have a number of times available in the sink.
Some of them are private processing system, while other me, you need to enable to configure them in
and hard.
OK, so each of these could be divided into three categories.
So we have a private first for a couple of days include the isyu timer.
As you washed off timer, then 64bit global timer.
OK, then the next categories where we need to enable the timer so they are not enabled by default,
but we need to enable them.
So they are an independent block available with single processing system.
So these include system washed off timer and to triple timer counter are available with this right and
it could generate three independent of the next categories where we could utilise the bill based timer.
OK.
Something like you say timer on any, say, time based professional timer.
OK to act, you are timing related functionality.
This the timer that are available are not sufficient, so we'll be discussing each of them in the needed
no time, usually operating two months.
So we they have a full remote or another one is annoying to break.
So Section five entirely devoted for a full mode, whereas when we go to.
Interpreter, six and eight, so we'll be understanding danger from GPIO as well as interrupt for all
of this.
Right.
So entire discussion on an intro will be focusing on infection rate.
So once you complete simple, intermediate and complex benefit, you get fundamental understanding how
we specifically utilize the drivers.
OK, maybe setting up the more calculating the parameters are how we work around it.
And so once you have this fundamental understanding, you are ready to utilize any or any of the benefit
of that things.
Great.
You build up ability along with this how to read or tribal or how to configure if they fit it and then
how to utilize them.
So once you get this capability, something which plays a very crucial role, then we do not get what
we are expecting out of our application is to debug our application rate.
So we have two types of technique.
It may be a software debugging technique, or it may either be in hardware debugging.
We will be discussing in detail both of them in a section six, six and seven will be focusing on profiling.
So we need to measure the time begin by specific function or application.
So how we achieved that will be understanding in this specific section.
Section eight will be rebooting on an intra section nine.
OK.
Whenever you have a requirement for a memory of me, there be a small memory requirement that could
be fruitful with the help of any RAM.
Or if you have a large memory requirement, then you could go ahead with a DDR, right?
So you'll be understanding how we access the data and utilize the Zillow to work around with boutiques
Siby, RAM, as well as right.
So this will be our entire target.
The framework for the course and these are some of the checkpoint, so major agenda will be to get us
since seven year with how we utilize the Triber, how we utilize the debugging technique in chips as
well as the memory resources.
OK, so let's get started.