1
00:00:00,120 --> 00:00:06,060
So let us try to understand the first error that we have right to you already program your FPGA that

2
00:00:06,060 --> 00:00:08,780
is downloaded a bit similar to an FPGA.

3
00:00:08,790 --> 00:00:14,940
And then when you try to run a configuration that is your C program on to an FPGA, you are receiving

4
00:00:14,940 --> 00:00:17,840
this error rate error while launching a program.

5
00:00:17,850 --> 00:00:27,930
So app transaction error and the DPI statuses FC two zero zero zero zero zero to one right or you get

6
00:00:27,930 --> 00:00:29,360
a memory rate error.

7
00:00:29,370 --> 00:00:33,980
So these are the common form of an error that you get when you start working around with a new word.

8
00:00:34,000 --> 00:00:37,360
OK, so let's try to understand why this error happened, right?

9
00:00:37,390 --> 00:00:43,620
So there are multiple ways by which you could program and FPGA, OK, and that is handled by the German

10
00:00:43,930 --> 00:00:45,100
GP, Facebook.

11
00:00:45,120 --> 00:00:51,570
So you have a two jumping interface over here, one of them which is used to select the possible source

12
00:00:51,570 --> 00:00:52,230
for your vote.

13
00:00:52,440 --> 00:00:52,770
OK.

14
00:00:53,160 --> 00:00:59,130
And either one is the programming interface that will be utilizing to program an FPGA.

15
00:00:59,160 --> 00:00:59,460
Right?

16
00:01:00,090 --> 00:01:03,570
So by default, it is on cue SBI.

17
00:01:03,600 --> 00:01:03,990
OK.

18
00:01:04,020 --> 00:01:10,200
So what that means is we have a programming flash which is built in self-test, OK, which we will be

19
00:01:10,200 --> 00:01:10,710
executing.

20
00:01:10,710 --> 00:01:13,200
So as you can take the power supply to a table.

21
00:01:13,470 --> 00:01:20,790
We will be finding a program is executing OK or the series of peripherals will be automatically start

22
00:01:20,790 --> 00:01:21,270
working.

23
00:01:21,570 --> 00:01:21,870
OK.

24
00:01:22,020 --> 00:01:24,720
And that is what we refer to as a built in cell test.

25
00:01:24,960 --> 00:01:31,230
So we already have written a program, OK, which will trigger a benefit, and that will help us to

26
00:01:31,230 --> 00:01:34,380
analyze whether all the peripherals are working on right.

27
00:01:34,590 --> 00:01:39,810
So that is the program which is presented in the flash memory, OK, and to execute that will be finding

28
00:01:39,810 --> 00:01:43,030
the programming interface that is selected by default.

29
00:01:43,030 --> 00:01:44,940
This cue SBI.

30
00:01:45,000 --> 00:01:45,330
Right?

31
00:01:45,690 --> 00:01:52,320
And when we are performing and execution of the code, that is, we have returned to school and try

32
00:01:52,320 --> 00:01:54,540
to execute on to an SPG here.

33
00:01:54,780 --> 00:01:55,170
OK.

34
00:01:55,320 --> 00:02:01,770
So we are basically utilizing a g tag interface, but we have not selected a du type word here, and

35
00:02:01,770 --> 00:02:04,620
that is what is leading to this error.

36
00:02:04,620 --> 00:02:06,540
That is a B transaction error.

37
00:02:07,050 --> 00:02:07,410
OK.

38
00:02:07,710 --> 00:02:15,450
So the simplest solution is to just bring out this jumper, OK, and added between the main connector

39
00:02:15,450 --> 00:02:18,070
where geotech is reflected, right?

40
00:02:18,070 --> 00:02:22,920
So here you can see the first two main header is for a sticker.

41
00:02:23,220 --> 00:02:23,580
OK.

42
00:02:23,790 --> 00:02:27,780
The second two main headers for us behind the last two mail here.

43
00:02:27,780 --> 00:02:29,360
This will be for G8X.

44
00:02:29,370 --> 00:02:32,820
Suggest they remove the jumper connector from here.

45
00:02:33,150 --> 00:02:38,700
OK, and then you connected over here, and then you will be able to remove the Z.

46
00:02:38,950 --> 00:02:39,240
Right.

47
00:02:39,240 --> 00:02:44,070
So this will happen if you are utilizing your board for a first time.

48
00:02:44,070 --> 00:02:46,470
So you brought the new book by default.

49
00:02:46,470 --> 00:02:48,780
It will be on to s.p.a.

50
00:02:49,080 --> 00:02:52,340
Just need to change the jumper to Jade A.