Who will resume that we have already added a block designed.
So what we do is we editing processing system right now here.
Once you are alleging processing system IP, you get a block automation and when you click on block
automation, OK, you get an option to apply about research now.
So when we apply work, we see what that basically do.
Is it basically enable a set of the basic.
They fell onto a what's right and we could directly go ahead and start building, our application noted.
This does not necessarily mean that we need to stick to all the paper, which are added by default.
So you could go to a configuration window by double clicking on anything processing IP, and then we
could disable the unnecessary paper below the paper that you do not want to work right.
So usually when we perform a block or two mission with the IP, we will be keeping this option set.
So this will give us an access to the default basis which we frequently utilize.
The other two option that you see is cross triggering and cross.
So as you, you want to trigger the signal from a software that is, you have your C application, OK,
which represent one of the part of your embedded system and another one is in hardware design.
So whenever we want to generate the stimulus from the software and then apply to the hardware, indeed
the simplest form in hardware and apply to the software, that is what we refer to as grass trigger,
right?
So at least for a few sessions, we'll be keeping this disabled as we progress further again when we
are not getting the expected result.
We we first started the debugging and debugging strategies such as I'lI or debugging our application.
If that doesn't work, then we could work around across the street, right?
So this is one of the strategy we have for our debugging.
So when we applied the boot research, what that will do is that will enable the setup of Wayfarer know
how it recognized the boot, because when we are recruited by default, the will also specify a scheme
for it.
So we do not need to manually specify how we do understand the boot, where we need to connect to peripherals
by analyzing a pool of data.
We do have a set of Huebel files for each work.
OK, so recognizing that it basically add up everything.
So all the peripheral which are recognized by a revival, we do not need to specify any.
So let me just try to go ahead and try to perform the booth automation rate.
So once we perform this block automation, you will clearly see we get the idea.
Right, so.
The DDR is enabled by default and then.
A set of strike rate, so if you just double click on an IP, you would clearly understand the signal
of benefits which are enabled on board.
So you have a B, you what GPI, o SD Ethernet and USB zero.
You also have an access to orders.
Does that the setup of benefits which are applied on board research?
So these are enabled by default.
Now, this does not necessarily mean that you need to utilize them in your design.
So if you are required to use them, you can go ahead with this preset or else what you could do is
you could just to sit.
The process of disabling is very simple.
OK.
So you could just double click on this lock design and it will take you to the option where you could
check or uncheck the peripheral, right?
So if you do not want to utilize it to just do it and then check it similarly, you the zero is still
zero.
And then if you want to for the right, any benefit, OK, you could just check it.
That is how we add and remove the benefit, right?
And you could also see a something that I do recognize.
OK.
It basically all to add up.
Very fitted for it, right?
So you have an email and then something which we do not know.
So this is the first week you go to a blog design, specify the benefit.
And so all the peripheral, which are enabled by boot risk, will see a checkmark.
You could just double click on the checkmark and then you could enable or disable OK.
You could also add any other peripheral if you want.
Great.
The next option that you have in an IP is the SPL configuration.
So here you get an access to any exciting if it's OK so that you could connect your sleeve IP, you
could also connect the moustiques types.
So here are the option really.
Two.
It will be Shumate by default and M.D., except we've decided.
So if you just need to disable it, you just uncheck this.
This is how we enable any Siblani, except also the general setting that we get right.
For example, the common one is the party looking for a new one, and that's the thing as you progress
further will be on this right?
We also get the reset and the trigger rate.
So if you want to have a reset, you could just enable it or else you would just disappear, right?
So I'll say interface if you want to add to zinc pricing system, so you get that option in an Pospisil
configuration, right?
Specified agenda setting that we get the tenting pricing.
All the peripherals actually in and base that allow you OK.
If you just go ahead, you could see all the peripherals and you also see the payphones, which are
enabled and disabled.
So disabled people are shown with Agricola.
Whereas the peripheral, which originally showed me the green card to see if I just removed this checkmark,
you could see that distance.
Three rates are already failed with Agricola, but as all the enable peripherals are shown with the
Greek right, then here you'll get the pin.
So.
So as we brought this, there will be understanding what am I always saying, EMI?
Right?
So clock configuration here you'll be finding all the options, really.
All right.
So the clock that you want to send to bill fabric, if you want to do that, you have that option.
Do it here.
The timeous.
OK, then there's include washed off timer and triple.
Timer count, right, so all the timer related options, OK, it may be a memory clock or an eye opener
from Cork or of yellow fabric lock or the AEDC, all of this stuff you'll be finding in that clock and
then you have a deadline on figuration.
In most of the cases, we won't be touching goodbye to flight of this will light duty DDR as soon as
we form onboard automation.
OK, so this allows us to get an extra space where we could the that and then into pads we practice
will be understanding how we enable the fabric and took it.
And then that we we could end up seeing processing system whenever we want to execute in high priority
dust for a lower priority to task.
So designed options that you get with a configuration of processing system.
Right.
So by default, when you perform a block automation, you get set of confetti filters, which could
be disabled by either going to a very, very you are just going to a blocked design, selecting the
paper.
You want to disable double clicking on it, and I'm checking the box, right?
BSP configuration give us an access, very good interface and the piece to the zinc processing system,
either maybe sleeve or master utilizing any export, right?
All the papers and peripherals.
OK, clock configuration, use and access to boot memory clock, IOP clock clocks, year fabric block
tDCS rates all the clock related configuration could be done over here.
You one provision will not be touching Ruby.
Be keeping it live right?
And then we have an interest so desirable adoption that we can then zinc pricing system.
Now something that will be understanding now is how.
How we recognize what all polls, which are identified by Dubai, differ so that we do not need to add
a constraint.
Similarly, how we know the Vatican and which are not recognized by we are also there as soon as we
find out that these are the periphery of goods which are not recognized by ARE in that case.
We need to specify a constraint.