So in this specific, we will be understanding how we could increase our capabilities, such as we already
utilize, you know, if you want to, you utilize you like zero.
OK, so we could actually enable from a base that allow you are zero and then you get an option to configure
it where you want to connect it, right?
So if you just go to an email configuration, OK, and if you go to an opening settings, you could
see you at zero would be connected to any of this stupid right.
So the good idea would be if you just go to the leadership of where an insulin goes off the table,
said seven.
OK, and look for any open rate.
So let's just go ahead and look for it in my open, right?
So the good part about it seven is some of and in my opens, I connected to the more food that we have
on Abu Ghraib.
So you could see a pea soup number zero eight nine, 10, 11, 12, 13, 14 and 15.
These are connected to be more great.
So in this case, if you want to have an extra, you are both free.
We could just go for this if the.
Do 32 are in so you look water and then dispense could directly be connected to.
The airport, which has been specified for in my open rate, so we could just go ahead and the full
quote, OK, if you just look for be more.
So each B Mark would consist of 12 bits, and we have one, two, three, four, five and six.
OK, so six such be marked boots are available on right?
So out of this, be more grief is actually connected to my right, so if you want to say the You Are
segment OK along with, then you want one to either you like interface so we could utilize the serial
converter.
We could utilize the serial converter.
OK, and then we could connect it to be more.
Right?
So once we do this, we just need to select the right.
For example, if we analyze serial converters, we have six right one two three four five six.
So DTI and CTS is for flow control, and we will be predominantly working on this because this will
be sufficient in most of the cases for our application.
So we need to focus more on being number two and being number three, right?
So we start counting from this one.
So we have one, two, three, four, five and six, right?
So we see and groan if you analyze.
So we have to see and examine our dedicated bin for visas from an upward as well as the downward trend
rate.
So if we go ahead, do this serial convert.
OK, so ground is the last bin and then visas.
OK, so this could actually be connected by utilizing the wires, and it's OK.
The only thing we want is to correctly connect the dots.
And so this is up in number two and number three.
So let's assume we go ahead and be connected to your pin number one, OK and pin number two.
So that will basically configure 30 19.
OK.
And if you just go to our blog design.
So if we look for a combination, so we have a 10 and 11 design combination, right?
So we do see 10, 11, 14, 15, 18, 19, 22, 23.
OK.
So 10 and 11 been now since 10 and 11 do exist or here, and 14 and 15 do exist over here.
OK.
So we could either connect.
Are addicts OK, so if you just analyze and addicts, so this will be connected to them?
And that basically mean, OK, so if we just connect in that vehicle, maybe we need to connect it to
pain.
Right.
So here we will be connecting and addicts, and then we have a mile 11 on the next pain that is spin
number three.
So we'll be connecting.
We're here, right?
So once we do this, so if I just copy this.
So here we already knew that being number two over here, right, so pin number two here is in my.
OK.
And number three, we're here.
OK.
So this basically represent Diab more JF seven, right?
This is connected to an 11.
Right.
So we could just see the it's been over here or we will be connecting.
OK.
This being.
Do and I think this is the first connection that we'll be doing.
OK, so this basically mean the connection between being and the right and the next generation will
be.
This they see we are connecting with number three to see if they do this connection.
Right now we have our external you.
I've been connected directly to JF.
Seven p.m. Marquardt OK.
And that basically means it is very clear connectivity to processing system with pin number 10 and 11.
So with this modification now we could proceed to right now, we could enable this and then we could
select and and eliminate.
So we need to make sure that PIN number 10 is and I expect this could be verified from here.
So if the number 10 is not extreme and number 11 is A..
So once we do this modification you are eligible to utilize, you will not be changing this since this
is directly connected to our USB bridge.
But if we want to add an extra, you are being fitted, you could just utilize there'll be more put
OK, because some of the more things I've been directly connected with the processing system.
OK, so in Typekit, more GB is connected to the.
Am I right?
We could directly utilize this means that we have and then we go ahead over here and we could configure.
So this could be utilized to connect any open interface, right?
Provided that and the more pins that you have on any device.
And the number of open matches.
So, for example, if your interviews consist of one two three four five six seven eight bent, so we
could directly connect them with the interface, and that basically mean we could directly connect them
with any minor interface and then we could access them utilizing a processing system.
So that will be our approach.
If you want to connect, you want to, you know, get to an external hard right, so this is.