So let us try to consider how we use this in a pool.
So immediately when we work around with the EDC, we try to use and ensure because they have we get
few more capability that's compatible more, but will also be demonstrating it so that you have a fundamental
idea about what you see and what are the different updates that are available in the drivers.
And as we progress and just goes on and into there, we will be covering some of the concept which are
not covered here, right?
So by default, UDC's locked in a bill similar to what we have with the private CPO timer and washed
time right?
So we need to purposefully we need to manually enable them.
OK, so we'll just go with the basic block to say OK that we've been doing from the beginning by utilizing
a teaser script, and then we will be adding the DTC.
So here you see it, block, but you just double click and will enable time with you.
Right?
This is the first step that we do.
And then we will be selecting an interface type to be EMI.
Rachel, if you can see that email.
So if you go to a very, very low and analyse to zero.
So we have zero here with no in 90, but that you would clearly see cross with Dennis de 0£ as well
as any to make this up part party pain for us, so we will not be utilizing zero.
Am I 18, 19?
Because there we have learned anything.
If you consider the next one to, we have 30 and 31.
So again is zero.
And you also have and you be zero and zero on the same at my rate.
So the good idea would always be to go over.
10 Am I open?
OK, yeah, my open.
And then next thing that we required is to specify that.
So if you just go to a clock configuration there you have an option timer.
So it's zero, which is the timer zero that we are utilizing IDAG.
This clock frequency, OK, so it is operating at one one one Makaha tonight.
This data will also be by a note from the driver x parameter which tribe right will be on this journey?
Just remember that this is the frequency at which RTC is operating again.
Clock sources the CPU 1x.
We could also specify an.
So if you have a requirement right now, let just go ahead and click OK.
So as we consider the e-mail, so we have a three output, right?
So we will be least concerned about an output because we want to understand fundamental operations with
ADC as we progress that in and try to utilize this output right will not be making any one of them external.
We'll just be validating our design.
So there's an automatic data connection and that you could actually verify by noting that validation
is successful.
So once this process is done well, go ahead to block design and create a wrapper, right?
So this is the next thing that we do as we complete that wrong design.
So what has happened is really that we already know that DDR and fixed air already connected to their
respective open.
And we do not consider these external things for connection to a base.
So we could just proceed to the generation of objects.
So we'll go ahead and click on each and need to.
Right now, the modification that we did in the case of previous example, where we consider 32 bit
washed off timer and that you do the.
The only modification that we did in as compared to our previous case, when we are discussing that
little bit timer which are private to keep CPU as well as they do to get washed up is they need to manually
enable GDZIE.
OK, then block searches again a CPA and it is operating at one one one megawatt.