We already looked into this kind of Daimler media watchdog camera that we have it sync processing system,
some of them are private.
Others are the independent blog that you have to.
Now the other kind of the time was that we could always utilize with the sync is the vehicle timer,
right?
These are basically an eyepiece and we'll be communicating all the options as well as data utilizing
any kind of.
So we have two popular bill timers available with us.
It may be any exciting.
Timer ordered me to be an exciting time, this washed off time.
So these are the two popular blips that we frequently will be discussing most on any side timer looking
right as we progress, but there will also be considering an inch of usage with any excitement.
All right.
So when we add any timer over here, so you see there are various bins available today, so do not worry
about things much.
We'll just be utilizing a single timer, right?
So for us, when we specified the timer counted basically equal to the number of timer that you have
minus once a year when we consider a timer.
But whenever you see timer, count her number there, you just need to specify the number of timer that
you have added.
Yet we have one minus one that is you, right?
So when you enable timer to so the number of times that you contribute is to the two minus one will
be your timer counting number.
So whenever you unless you Gail, be finding this parameter, you just need to calculate like this rate.
That's the thing will be keeping at this.
OK, now you see that you have a sleek st of is on any timer.
OK, lock and reset.
So we need to add a master except to the same processing system, and then only we could be able to
connect them to get.
So let me just reconfigure and think processing system.
We go to a special configuration and then we enable General Motors Mastery Ixi interface.
This is the first thing that we do and along with this, we also need to enable a reset and clock,
right?
So we go to agenda and here we have a reset, right?
And if we go to a clock configuration, there be a provision to either build fabric clock right to the
operating frequency for us is 50 hours.
In fact, we could change this as per hour requirement to really just make it 100 megahertz at the exact
timer will now operate at 100 Maggart, so that could be used to competition for the right.
So let it just hit Ducky.
Now we have Mastery S.A.C. report added clock, and we started it as soon as you do this, you immediately
get connection automation, right?
So we'll just be performing an action automation and this will automatically add visit to for us, as
well as the excitement of any great will not be utilizing any one, any of an output pin that we have
a site on any excite you dominantly how we utilize.
And he said, I'm going to challenge you to relay.
That is what we are discussing right in will be our understanding later on as we put all of this in
an interest section, right?
So you could see I blog because I do not consist of any board for which we need to specify a consumer.
All the codes already been connected to the respective pin.
So we just need to go ahead and generate an actual wrapper.
OK.
And once that happens, in addition is successful, we just need to go ahead and perform generation
of objects.
Right now, there's a commentator that you get with an idea, but we haven't configured anything, so
we do not need to worry much about this, right?
So let me just go ahead and try to turn the picture.