So let's consider how we use and interpret any exciting American right to be already considered a upwardly
mood of any excitement.
And now we'll be understanding the entire mood of any excitement.
Right.
So we have just started and essay and again to connect to the slave and to face off any excitement we
need to have on my story S.A.C. report.
And along with that, we are also required to have a clock as well as research with this drug connection
if you perform a connection or commission.
This will automatically interface makes IGP zero two hours sleep.
We seem to feel that we have on an X ID. The last thing that you going to do is to connect them to then
OK, which is an output from any said time or two, and I had a couple of signal processing system.
So with this, you need to perform a validation of design, then generation of RNA still wrapper and
then finally, completion of a bitstream, right?
So I have already generated a bitstream and export it and hardware file into an SD.
So now we'll be going through an entire C application eight.
So the step is for us is to initialize barefooted and right.
So in this case, the base thread for us is the exciting OK and the recommended driver for it is this
we already discussed right for enabling an internal exception handler.
We required select option and then GC, which will be handling an entire process of initializing our
general control right now.
If you go to DMAA CDR.
So the difficulty with utilizing cog initialize it it it doesn't return status, whether initialization
is successful or not, right?
So you could see as opposed to the previous scenarios here.
Could you initialize do not read in anything?
So what we will plan is we will be utilizing initialize instead of capture initialize, right?
And this doesn't required a config structure.
So we do not need to use lookup config.
So we'll just required an instance structure for our time that will be adding We're here and the device
will just go away.
So I have declared the time of structure and will be utilizing both.
That is the config structure as well as an integer structure right now.
If you go to a timer unit, OK, here we declared one st this variable that will just be checking whether
initialization is successful or not.
Right?
So we are utilizing EMR CTR initialize the timer instance, the stigma and the device idea, which could
be easily found out from our experimenter.
Not right.
So if we just go to experimental nortec, just need to look for the EMR.
So if you just search for PMA, you'll be finding all the data related to the timer.
OK, so these include the unique ID that we have for our interest, OK?
And along with that, you also find the device right?
So this is what you need to add in here right now.
This will return the this and then we will just be checking whether it is equals to existing success.
So if that is the case, we will see the EMR need to successfully initialized and we'll just be mentioning
that they are my anything right?
So this complete initialization of a peripheral that is the side timer the next is to initialize are
GRC, right?
So we again declared a status variable over here.
Then we will be utilizing lookup config.
So this will return the GRC config that is config structure.
Then we will be utilizing it in and see if initialize.
OK to initialize RJC and then will be checking whether Steet is written by C of G.
Initialize is equals to existing success.
So if that is the case, you'll just be mentioning that in a Texas full LS, we'll just be mentioning
that Jack Nixie, right?
So this complete step eight, where we initialize both Jack as well as the exact time of the next step,
is to utilize the exception APIs to enable an exception.
OK, so first we add and end it.
OK, then registered handler, we will be specifying the type of entropy.
So in this case, it is an IQ entropy.
OK.
And hang for it will be in short Handler, which is master handler for saying it's instances.
This makes sense, and we just need to enable an exception.
Right now, we need to specify and function, which will act as an inch of handler for us.
So GC connect here the GC Instances 80 the unique I.D. This could be found out from its parameter page
and a handler.
Now, if you just analyze it as opposed to the GPIO.
OK, so here we do see some of and in Japan law, right?
So you have A.I.M. in Japan, right?
So you need to mention this when?
Be considered a Gocycle great.
And then when we configure our climate, so dad will be mentioning the function, which will be acting
as the intercept handler, right?
So remember this trip whenever you have the specific interrupt handler and driver, so you need to mention
them in an AC.
And whenever you have this kind of scenario, you also have set handler.
OK, so that will automatically configure the function, OK, which will act as an interpreter.
So with GRC Connect, you just need to mention this in Japan.
And utilizing, said Handler, when you configure a pet, if you need to mention the function, OK,
which act is it in Japan?
Of course?
Right.
So we'll be going ahead with this.
So here we mention GMR, CTA, interrupt handler, right?
And then we just need to enable it, right?
So those are the two comments.
Now you do not have anything else enable or disable danger.
Right.
So you do not have any such function.
We do not need to enable any switch after this.
So this completes an entire process.
Now, if you analyze the function, which behave as an interrupt handler, so once we enter over here,
we are just checking whether timer is expired.
So if that is the case, we are printing and.
And then since we do not have anything else, enable disable all clear, we do not require to mention
anything.
So this completes an entire code.
Now, when we go to a mean, we are calling in it like this will initialize you at the same time within
it.
So this will be initializing a timer and guessing it.
It will initialize AGC as well as configure it for handling and enter from a timer.
OK, then we need to specify and function handler.
So here we just specify that they interrupt.
And there is this one, but utilizing a certain look, we will be specifying a function.
Right?
So for us, it is Daimler Handler.
We just mentioned, said Handler Daimler Handler, which is a function.
OK.
And here we just need to mention the tamer instance.
And here also we need to mention the Daimler instance right now.
We need to set the correct more rate so far.
And in more, we added this value OK, which will basically enable our interest, and we also selected
an authority.
So once our.
Gounder reaches to a max value, OK?
We basically will be resetting our counter to the value that you just specify, right?
The next calculation of the value.
So here we do not specify a download to our counter will be counting in an upgrade.
So we selected and we say to be all 32 bit say that if you just.
Reconfiguring any site where you could clearly see the weight that we choose in.
Right.
So I say is operating at 50 megahertz or if you just subtract this to that is to raise to 32, that
is the maximum value that we could achieve.
And if you subtract 50 Mega because we are operating at 50 megahertz, so ultimately this will be account
which will be giving us the delay of one second rate.
So this is the value that will be adding into a counter and then it will start counting uphill.
So to reach a maximum colonnade basically cover 50 mega steps, and that will be basically giving us
a one second rate.
So with this value, we failing to decimal to hex converter and here you could see this is the value
that we get in and hex format, right?
And this is what we specify over here.
So this will give us an idea of one ticket, then we just need to start our time, right?
This completes an entire process, and then we just need to wait for an end.
Right.
So we'll just see what occurred and then we will be programming our FPGA.
OK, so let me just go ahead and try to programmer FPGA to 1's programming is successful, will just
be connecting our second terminal to the respective compute and then we'll start execution of an application
on to it, right?
So here you could clearly see that we have timer in, it's successful and it's successful.
And then in an interval of one second, we have an interest rate.
So this is how you utilize and interpret any say timer.
The prices remain exactly similar to what we've been discussing from the beginning.
Right now, what we're going to do is we will be understanding how we utilize an interest for the private
resources that we have with and right that is as you are washed off Daimler and probably.