So let us try to understand how we utilize the intrepid washed up again, we'll be considering the washed
up primer, which are private to our teeth.
That is 32 bit washed off timer, OK, which we already discussed how to utilize it in a bowl.
Right.
So I blocked it and remain C. We do not need to do any changes because they are enabled by default,
right?
So now when we go to and see, OK, the first thing that we do is to include all the header plays that
are required for a basic rate.
So for a washed up, Pamela, we have WTT, right, so this could be easily found out by looking into
the pool support package so that it does go ahead.
So if you go to and Mrs.
OK, so for our watchdog timer, we have an siu wtt for gender controller, we have, as you guys see,
OK.
And we only have this stupider pay rate.
So for adding an exception, handlers, we also need to include selexipag.
Right.
So these are some of the many.
Did you find that we, you know, when we go to the watchdog timer here to fight, right?
So the first thing that we do is to declare a new structure will be one will be, for instance, which
is WTT and then conflict structure.
Right.
So here if you are.
We added the conflict structure as well as an instance structure for our watch DR.
Similarly, we have added a config structure and an instance structure for our general interest rate.
So if you look to check, the step one is to initialize all the time and so will first be initializing.
And so far initializing, we created one function which is still.
OK, we have a status variable which will be holding the value that is written by CFD.
Initialize rate plus will generate a value for WTT config, OK, which is called VIX structure.
So we'll just use lookup config function.
Specify the watchdog timer device ID parameter dot so that we will be getting the values for WTT config.
And this will then be utilized in a judicial case.
OK.
Where we specify the instance structure, which is WTT for us, the conflict structure and the basic
rate, and this will return whether it is successful or not.
So if status is equal to the status axis, we'll just be printing that wd d initialization is successful.
LS else we could see that WD, right?
So this are those steps that will be performing to initialize our WD similar step.
We need to perform to initialize Argosy.
OK, again, see this variable lookup config where we will be specifying gassy device aid from experiment
code outage CFD initialize function.
OK, again, the infrastructure config structure and the CPU, etc. So OK, and if he does, that is
Sergey initialize ification.
The access to success will be mentioning that you need to set this one else, right?
So this two functions we are calling in a mean function that is the completion of our step, right?
So we have a new platform that is used to initialize our UI, then to initialize our dimer.
OK, and then we have the integrated used to initialize Argus.
OK, so this complete the step eight, where we initialize all the paper.
Next step is to add an internal exception handler, right?
So here we need to include init.
Then we need to specify the type of an intro and along with that, which what will be the handler for
adding OK, and then we need to enable it to just go to school?
OK.
Here we have added a logic for handling the exception for this to happen, we need to include the exception.
First is the exception in it, so this does not prove than anything and this does not accept anything,
right?
Then we have this trailer where we specify the type of an income, which is IQ.
OK, and then the handler for us will interrupt Handler.
OK.
And then the entropy instance Sochi, which is Gee.
And we just need to enable our exception to this, complete our step.
Finally, we need to specify a range of candidates, so we have declared a function WTT handler that
will serve as an interest handler for SO.
If you go to WD.
OK, so we.
Do not have anything related to an interest rate, so you really see we do not have anything related
to an interest rate.
So in such kind of scenario, we just need to specify whether that the logic that we want to go right
to whenever you are playing anything related to an enabling shop didn't have a role.
Drop down, disable and you see this, you just need to specify the logic an inhaler and then CPI will
automatically handle an entire entire process in their system, right?
So here you could clearly see when you go through and wash it off time or hide it, right?
So we do not have anything as enable or disable interrupt.
OK.
We do have certain function to restart and hold the counter OK, but there is nothing they enable or
disable interest.
So in that case, we could simply out and that entire operation will be controlled by a CPA.
So we do not need to worry about that right now here.
You just need to specify the interrupt handler.
OK, so for us to interrupt that in instances like, OK, the IED, the unique interrupt click would
be found out from its parameters and this could be a start.
So if you just go the experiment, go on edge and inside that you have experimented on this corpus,
right?
And here you be finding the device for our WD right.
So this will be utilizing OK when we utilize gas connect and then we need to specify an interrupt time.
So for us to handle it and you do not want to do.
And so we'll just be adding zero in the place of call your all back right after this will just be enabling
the input to Archie and other then that we do not have any function for and controlling and interrupt
of the ability.
So Sibiu will automatically control it for us.
We do not need to specify anything.
That's the only thing that is pending is to specify the logic for intra-Party.
So here we are.
Double checking where the timer is usually expire.
So if it is expired in that case, we are printing that.
We have an intro, OK?
And then since we do not have anything to come out of an interrupt, it will automatically handle an
entire process.
So this is the simple logic that we have in mind ability to handle this.
Now we need to specify an operation, right?
So.
First, when we work around with a timer, it's to stop its operation.
OK.
And then we have to move for WTT, right?
So if you just go up, you'll be finding we have a washed up more.
OK, where it is basically a down counter, so it will start decrement again as soon as we just do a
08 with automatically reset, right?
And then next, when we have a timer mode.
So in a timer mode, OK, whenever the counter reaches zero again, you do sound counter.
So we're into target 30 is set a spending day.
So this will Genndy and interrupt.
So this is the mode that we are targeting.
So to set the mode.
We have a function, right, so that we already discussed.
So we're here.
If you just go ahead, you have the function to set washed up more.
You also have a function to set a timer mode.
So this is what we were working on.
So we are we have added that function.
So this will set our washed up time at any time.
But right, so we just need to pass an instance.
Then later, you may want to have a delay of one second.
So we have no data washed off timer with the count of three three three meters.
No.
This also runs at half off the clock frequency that we use for operating around right here.
We have enabled an order.
So what?
This will do it as soon as our outer reaches to zero, it will automatically be reloading our counter
to the value that we specified, right?
And then we specify an operation right now.
Here we need to enable and interrupt OK and.
So if you just go to the various options that we have, so we have a specific.
So this is what you need to apply in an option when you want to enable learning.
OK?
Similarly, when you want to perform in order to reload, you need to apply an end time or more.
This.
Value, right?
So that is what we got to do, we're here first, we are extracting whatever the value that our option
have.
OK, so to do that, we have a great control function.
Will be operating in an option, which is you that you do and then we will be simply offering it with
the mood that we want.
So we have a control lighting level mask.
And this will basically allow us to working in our tourism, right?
And in this operation, we need to sit right.
So we are reading over here.
By utilizing a controlled wreck and then set control rig will allow or we'd set the time writing this
right to this opt, we are applying.
And finally, we're starting right now.
Only logic that will be adding in our main function is just two weeks a white flight.
So this will be continuously reading of this right now.
What are we going to do?
Is we will just be going ahead, saving our core right and try to force program freedom.
So once programming is successful, we'll just be checking whether there are a sticky terminal is connected
or not.
So we'll just be collecting hours to get them to come forth and then we will be running our application
on and hard.
So let they just go ahead and try to see whether they can do and interrupt endangered, authentic right?
So we see WTT and it is successful and it is successful.
And then we are having an interest in that interval of one second, right?
Now, Cincinnati Mahmood, we have an option to enable an auto reload.
We actually do not require to add this function, as we did in my case of Baltimore great.
So we could just be commenting this out because this is useful when we work in, then most stop all
in a time of war, this itself will look fine.
So with this modification, we'll just go ahead and try to again relaunch a simulation and let it just
observe whether this is working as expected.
Remember this Enable automobile release for Alberta Health and for time or more.
We have this option right off analyze the console that's still able to see an inch in an interval of
one second.
So if I just clear console, you could clearly see me still able to automatically generate and interpret.
So in the previous case, what we are doing is we are also purposefully restarting our time, right?
So let's just go ahead and try to remove this auto reload mode from here.
OK.
So by default, now we do not have anything as an auto reload, so we could just go ahead to the watch
dog handler and here we try to restart before we exit from an hang right?
So if you just go ahead to the drivers of the bullet, we must be having the function which basically
restart our time, right?
So.
So here we have restart WTT.
OK, so let's try to utilize this function and add it to it here, so after we perform our execution
of an algorithm, the logic that we want to perform in and interrupt handler just be specified that
we want to restart our washed-up name.
OK.
So here we have not added an auto reload mode.
OK, so let me just try to perform an execution of this code and try to see if this work as expected.
So we'll just be clearing the previous.
And you could still see that we are able to still work in a similar right.
So these are the two ways which are eligible for both RSU timer also, as well as a washed off timer,
right?