So now we know that there are two ways by which Singh could access the base that are either utilizing
an email.
OK, so this report is in the peripheral, which are directly accessible with the zinc processing system,
whereas if we.
Do not have an economy, Robin.
OK.
We could out the connection from the crossing system to an extra reporter utilizing any PJ fabric,
OK, and that is what we refer to as an e-mail, right?
So we will be considering the demonstration for both of this method.
OK, so that we understand both, though, Keith, so that we could understand how we could utilize.
Email and e-mail with the thing for us, interest rate soap supports just.
The I over it.
So the first thing that we do is to recognize the pain, the myopia number, where we have elderly and
sick connected right to in this specific section, we will be predominantly working with the GPIO.
So let me just go through the reference manual of our sideboards at seven one zero four OK and find
out the email pin number where we have the GPIO connection, right?
So we have total 54.
Am I right?
So this we already know.
And if you analyze the GPI that break, so you can see we do have been number seven de Mayo seven is
connected to lead four.
We also have the button four and button five connected to PIN number 50 and.
Right.
So we will first focus on controlling energy.
And as we progress further, we will be try to incorporate the button along with energy.
Right?
So let me just go ahead and remember this number.
Okay.
So we have our really connected to being number seven because when we work with the driver, we need
to specify the pin number where we have a peripheral press, right?
So it will be on being number two set, so we go ahead.
And this is the fundamental block design that we have created utilizing the that data we have with think
processing system and we enable the upgrading.
The first thing that we are going to do here is to enable the Jupiler my to to customize an IP.
We just need to double click on the zinc processing Sasuke and then.
We go to the paper.
OK.
And here we could see that we have GPI.
Am I right?
So we just need to check GPI, am I right?
So this will enable all the 54 pins as TPA, right?
So although am I open?
That is right from zero to 53 will be configured as a GPO and only those which are being utilized.
Other resources, for example here.
Here we have a what one if you just go ahead.
So here we are utilizing what went right and that will automatically be removed from guy with my right.
So you just need to check GPI email.
So this will automatically enable all day my open rate to all those things which are utilized by the
other resources.
I've been disabled from that on my right, but this is just we just click on OK, right?
And then we will be performing a validation of this right.
So we do not need to do anything more.
We just need to enable you, what, for debugging purposes, just to understand what the drivers are
configured correctly and that you need to enable.
GPI worked.
Once this is done, we go ahead and create an ideal wrapper for our hardware design.
Right.
So right click and create your track, right?
So one of output is ready now, since we already know that we are utilizing an MYOB, right whenever
you are utilizing and my open socket.
So we are automatically recognize to respect your pin number where we have other resources, right?
And that could be cross-check bypass by first performing a synthesis.
So once we have our synthesis ready, OK, we could observe.
And are you planning to where we will be getting the list of ports which are present?
OK, and then we could understand whether they are connected to the respect to be Japan's or great.
So the data will be if you are at any stage, find it difficult to recognize whether all the pools that
up in our design, whether they are connected to their respective hardware and just performance synthesis,
and then proceed for generation of obesity.
So I've seen this this is complete, it will just be choosing openness if this is Josie and critical.
Right, so this will automatically open up and eye opening will.
So here you could observe that we have a fixed site and fixed deal consists of an image open, right?
So here you go to actually see that all day my opens are all readable and electric.
So there's also suggestions that whenever you are connecting the hardware, OK, utilizing an email,
we'll get all really have the dedicated package been built specifically to.
We do not need to perform an intermediate step.
We could directly proceed for generation of obesity and fix.
And the results have been connected.
So we have a two boards which are present in our design and both of them are fixed.
So once you confirm that all the points are been connected to their respective pin, you just need to
go ahead and click on jellied bitstream, right?
So this will you need the big fight, OK?
And that we will be exporting to our cities and to build up our software application.