So now what we're going to do is we'll try to modify our WHO says that we include the push button into
our right, so we already understand how we can use and witnessing processing system within my own devices.
Now what are we going to do?
We will just be going through and finding out they may open where we have our push button right.
We will see on a dupilumab to a is going to get to be number seven and we have to push button, which
are connected to PIN number 15 two.
We will be utilizing any one of this push button.
They will be reading the status of a push button and writing this down.
And in the previous scenario, what we are doing.
We are adding a value of one two and then reading for some period.
OK.
And then again, I'm making the values right.
So this is how we are generating a blinking effect.
Now we will be reading the status of the push button and then writing the data off a push button on
penalty rates.
So the first thing while working with a push button is to correctly choose the.
Pull apart.
Right?
So by default, if you go to that same processing system, right, and click on an IP, forget to re
customize it.
You could not do that, actually.
OK, so if you go to customize IP and email configuration, OK in and I hope you tell you have all the
peripheral Stewart's OK.
And then in the GPA, you know, if you just click on this arrow, you could actually see by default.
OK?
Some of the papers have a pull up to Rachel.
When we consider a push button, we need to able to pull up.
That is an important thing that you need to do.
If you do not disable pull up.
What will happen is independent of the state of a push button.
You will always be reading what great.
So we go ahead.
And I know the image open where we have push button.
So it is on in my 0:50 and in my right.
So we will be first disabling the pull up for both of those Emirates.
So who do I am?
I be this click on the zero and then choose Disable, right?
So they are enabled by default.
You need to make sure that you disable that, OK?
Similarly, in my overview, it will be disabling.
The rest of the code will not be touching, in fact will just be confirming that am I open number 50
and 51 is not utilized by any other resource.
So if you go to a peripheral Io, right, and then if you just observe, am I you 50 and 51, OK, so
the I utilized by GPA, right?
So this just is that the added benefit of not utilizing this too.
So these are the two things that you need to make sure that the Dubai open where you want to use the
specific resources, especially elderly and the push button.
OK.
They are not utilized by any other peripheral in this case.
The pin number seven, 50 and 51 is not utilized by any other medicated.
And whenever you are working with an pushbutton, see that you just right.
So as this is done, just click OK.
So why don't you perform this configuration?
Select the block design and just again create the right click and create an external network.
So one sided weapons ready.
We already know that since we are utilizing an my to the adult duty been connected to their respective
hardware, we just proceed and click on Genndy Bits.
So now we will wait for an additional comic strip and then we proceed to Whiteside.
So I presume your mission is successful.
The only thing that you need to do is to replace an existing excessive find x who will just be closing
this ballpark.
We will do fine and then we will be exporting at hardware, right?
And this will be including excellent.
This instant we will select the same territory where we have our existing excessive line.
So click next and then immediately you get the pop out, whether whether you want to operate an existing
excessive.
Quite so, you just need to click.
Yes.