So far, we cover 32 bit of private sleep.
OK, also we covered 32 bit washed off timer rate, and then we also looked into how we use to rate.
What are we going to do with the rest of the timer rate to 64 bit global timer we will be discussing
when we work with the profiling rate or there we will try to focus on how we use a global timer and
system washed off timer.
You could learn on the similar line how we work with the DDC rate.
So the rest two timers, which are available as an IP, is with us in and all designed.
So we'll be discussing it.
So we'll be focusing on any exact time of year.
We'll also be utilising any essay timer while we discuss it, providing on the similar line.
You could also work around with an essay database washed watchdog timer, right?
So this complete the series of a timer, which could be used with the zinc processing system, right?
So let's focus on any essay timer in this specific medium.
OK, and then as we progress to a profiling, we'll be discussing 64 bit global timer work, and the
rest of the timers could also be explored considering the fundamentals that we discuss in this specific
section.
So we already have created a new project and did the same processing system.
Right now, remember that we are planning to utilize an IP, right?
So we are required to provide the necessary interface that allow us to interface with an IP to the zinc
processing system, right?
So we need to enable the zero port on a single processing system to which we will be connecting art
exact right, so that in just over a week on a zinc processing system to reconfigure it.
OK.
So we need to add three things, right first.
One is we need to add an M. G P zero interface.
Okay, then we go to a general.
That day we find reset for our IP.
And the last thing that we required is to have a fabric look great.
So let just use tho frequency to be 100 megahertz, right?
So remember this we are providing the clock of hundred megahertz for our IP, right?
So click OK with this configuration and then we can proceed to add any extra time or IP, right?
So we just search for a timer and then you'll be finding we have a excited timer and the exact time
based washed off timer, right?
So we'll be discussing the excitement in this specific video.
So just select it and double click on it to add it right to refining a series of pain which are available
on a series of an output pen which are available but will not be utilizing any.
Any of this in our agenda will be primarily to understand how we use an exact time or IP to generate
a constant delay first and then as we progress to an interest section, we'll also be discussing an
interrupt.
OK, and then you could explore gen data out zero and generate out when these are basically an output
pin that could be used to check whether our timer is expired or not.
Great.
So since we have a two day modes present with this exact IP, so we have a two output over here, right?
So once we add an IP, the first thing that we do is to perform a connection automation rate.
So this will automatically connect our zinc processing system to any side.
IP rates will not be working with any of this port, which are available over here.
So what we are going to do is will directly be proceeding to validate design.
So this will verify whether all the mandatory connections are connected to the respective pins and we
are ready to generate the exchange rate.
So here you could see these are four critical warning related to our DDR.
But since we have not configured any of the parameters, we could just ignore this warning right here
we go to a two step and generate any on wrapper for our design to one side.
Wrapper is ready right now.
You could clearly observe in our hardware design, we only have to put one instead.
Another one is fixed right where in our past experience justice, that both of these are already been
connected to their respective pin rate.
So we do not need to worry about the performing and intermediate synthesis and then proceed in coordination
of virtue.
We could directly proceed to generate the bits.