So let us try to fill our application budget.
This is the first thing that we do as we complete our application project.
And once I build a successful.
We will proceed to debug and repetition rate, so they just click on our application project, greatly
debug at launch one hardware, right?
So this will switch our perspective from design to Rachel here because the option that we get when we
perform debugging all of our applications.
So there's options we already discussed when we are understanding a breakpoint right now.
The second option that we're going to discuss over here is of memory.
Right?
So this allows us to analyze the data that we have on a specific location, right?
So at the time, you could analyze multiple locations that will be usually occurs when we are working
with them.
How we add the address to the memory report is you just need to click on this plus button, right?
And this expect an address from use.
So let it just go ahead and find out the best address so far.
Memory controller, right?
So if you just select this and click on F3.
So this will take us to the basic research.
So we'll just be copying this link on this plus again database over here.
Right?
So once you add a base address, just click OK, and this will automatically lower the default view
of memory.
Right.
So you could observe here we have an interest rate and this represent the byte right two on the top,
you could see we have a 16 byte, which could be any later and then we have a number of rules, right?
And this is a president.
So this is a bit difficult to analyze.
The first step that we're going to perform is to run our application.
So let me just go ahead to our galaxy, and the only thing that we need to do is to click on this resume
button, right?
So once you click on this resume button, you would see all the data which is updated after we execute.
Our code is highlighted with the radical array, so you could see six of the updates over here, right?
You could change the relics in which you want to display the reader, right?
For example, if you just click on this new rendering.
You would choose in which specific critiques you want to display the no right to, if you do that and
saying this.
And I had rendering right.
So you could observe the detail in it and say decimal format, right?
We know that since we are working with 10 byte oriented memory, right?
So the next address is offset by four.
So if you could analyze or if you could modify this view such that we analyzed the single address,
I think.
OK, so here we know that the next address will be accepted by four.
Right.
So that is the only thing that we will be considering.
So right click on the address.
Step right here.
You have something which is referred to as a format, right?
So by default, you could see we have a 16 byte that you display in Andrew and then the food column,
right?
So here you could just use a fork because we know that the new data will be all by food, right?
So the next will be autopsied by a full fight.
And then we could just add the column size to be one.
So once you do this modification and click OK, now you could see the first data that we have is at
zero and that is zero.
OK.
And then the next day is operated by four.
So at the memory location four, you have a lead of five and so on and so forth.
Right.
So this gives us that we too easily analyze it.