You know, let's assume you are in a situation where you want to profile your entire application consisting
of four different function rates, so instead of individually utilizing the time since, we do have
a limited number of any time.
OK.
So in that is the good idea will be to utilize an internal feature that we have in any way designed
to profile our entire application rate so will be understanding an entire process.
Now this is bit difficult at the start because we need to follow a lot of different configurations stating
that we'll just be blindly replicating our process for first three to, for example.
And then you could perform the profiling for a different application on your great tool.
Here we have utilized that script.
And created a fundamental block to saying, right now what we're going to do is we will be fighting
any excitability for which we will be writing an application consisting of a number of functions, OK,
which we'll be profiling.
So let's restore seed and customize our block.
OK.
Now, this to include the number of quote, which are necessary to interface the Dubai with the zinc
processing just.
So we go ahead to a beer spill configuration will enable our clock reset.
OK, and then we also required an essay Zero in the Voice.
OK.
We also required a clock for our fabric.
I know remember the profiling is done considering a clock rate.
So if you consider the Blades, we need to add any timer, IP and independent timer IP that could not
be used for any other purpose.
Similarly, when we consider an processing system, since we have a number of internal timers available
with the Xeon processing system for reprofiling, we prefer to use an issue timer rate to remember we
are utilizing LSU timer for reprofiling.
So you could not use it for any other purpose.
So this is an important point to note.
Now here we have added all the necessary ports which are required to Indivior's any excess GPI like
Polaris grass seed and had any, say, GPI.
So we'll just configure it to work with a reality.
So we'll select the single channels and we'll use an default.
So this is what we're going to do.
And then we perform a connection or commission, so this will automatically connect.
I say GPI.
It was interesting system utilizing any sign to connect to this completes our fundamental block today.
We go and validate our design.
So once validation is successful, right, so we proceed to a small step and we create an actual wrapper,
right?
So a rapper is ready.
Now, if you go to a board that Rachel, you could clearly see we have one, two and three boards which
are present in our design.
So we already know that we are, in fact, is connected to the respect to hardware.
Right.
If you consider a little bit too, you do see a low mark just neighboring to affordability, and this
signifies that the LCD board has been already connected to the respective hardware.
So we could directly proceed for generation of.