So we already lost this about an internal timers that are available with this embarrassing system.
So we discuss about private data with a pseudo meringue, with a deliberate watchdog over who will be
now discussing how you handle an interest from the right.
So for them, we do not need to do anything like adding an entire thing to a person's system and then
predicting and interest from the resources to another human.
So you just need to create this basic block to say where we have just enabled and you what?
OK and $d theory and utilizing this block that we are ready to work it out with an interferometer private
rate.
So we will be utilizing this block diagram for both the cases when we are working with the private 32
bit sudima and the worst thing.
All right.
So you just need to create a wrapper out of it and proceed for generation of our bootstrap rate.
So the mandatory driver rate, which is the first thing that we do when we start rolling up our application
rates, if you go to the board support package, look so for an issue timer if you just explore the
board support package.
So the recommended driver is a simple timer.
And in the next video, we will be illustrating how you handle an input from a stop, right?
We go ahead and we include a CEU timer darkness, right?
So this is the idea for you.
For our 32 bit private time, for handling an interview, we need to include two driver.
Assume an exception, right?
So other than that, we also required an X parameter, not each fight.
This consist of all the hardware related information, right?
So if you just go through an issue timer again, we have a config structure and an instant structure
which could be utilized to perform an initialization.
OK, then we have a function to check where the timer is expired or not.
We also have a function to restart our timer.
We also have a function to lower our timer, depending on the delay that we are expecting out of 32
bit timer rate.
So this could be used to load the timer depending on the delay that we are targeting for the 32 bit
timer.
I then in turn, if you want to find out the value that we have in a timer at this stage, we could
just utilize get counter-rally function.
OK?
We also have a function to enable or disable an auto reload mode, right?
This we already discussed.
Now you could find out that we have an inability to operate so in any timer, which we discussed in
the previous example there we do not have an inability to act, auto disable, integrate.
So you need to include this if you want to close this switch.
OK, we have a guy named rate, but to close this switch, right?
So we need to find out whether we have any device basically enable, interrupt or enable global into
Brazilian art that if the driver right now we understand that in an SEO timer driver, we do have an
inability to.
So this is utilized to close this.
Remember this?
Then we also have a disabled interest rate, and we also have the EPA that could be used to get them
into this, as well as a clear interest rate.
So a few more functions are present here as compared to any excitement.
And that gives us an advantage.
Other than that, we have a look config CFT initialize self-test start stop and frisk.
So these are the kinds of apps that we have.
OK, now we go ahead and try to disclose an entire application, right?