Let us see how we work with then washed up demo, which is private to sink US interest rate again,
the block designed to mean OK and the driver that is recommended for a watchdog timer is a sealed rate.
Other than that, we also require gassy and exception for any panel and experiment.
So we start with an initialization of a WTT, so we declare the config structure and install structure
OK, and if we go to the WD DNA.
So here we perform an initialization as well as configuration of a WTT, right?
So first we call look up conflict where we add a device, Heidi, right to this device, add a stake
in from an X parameter, not quite happy.
And this will generate a config structure that we are utilizing in a CFD initialize SoC, along with
an instance structuring of this address to perform an initialization of AWB direct to once initialization
is done, that this will return the status of initialization to this status variable.
OK.
We are verifying whether it is equal to existing success and if that is the case, we are just mentioning
WTT and it is successful.
As we mentioned WD, right?
We also perform a configuration of a WD in a WD in it right.
So if we just explore the WD driver, right, just to understand the different APIs which are allowed
to use.
So we have a function to check whether our timer is expired.
So we know that there are two modes in which WD could be used to get first mode is the WD demoed.
OK.
And the second mode is the timer mode, right?
So WD DE-register is down counter that we already know OK and you to start delivering as soon as we
start to wash off that right.
So we have a washed up mode, which is considered as a normal mode, and then we have a timer mode,
which is referred to as it.
I interrupt.
So whenever any timer mode, whenever the counter reaches to zero, the event flag is set in an interface
to register.
And if we enable lined up to.
So Interstate 30 is set to spend digging it into a distributor, right?
So in this more is time were expired function can be used to verify whether washed or counter is actually
reached, was he right?
So this is what we got to use when we are working with an interest, right?
So if we go to our school, the first thing that we do is to forcefully stop our timer.
OK, then we set up the mode of operation for our WTT as a timer.
Great.
So when we are discussing a pool mode there, we set up the mode of an operation as it washed off here.
Since we want to utilize the interferometer watchdog timer, we want to set the mode of an operation
of its timer mode.
We are loading.
A watchdog timer says that it provides a delay of one second.
Now remember our private watchdog timer as well as private that you do see a timer operate at half of
the dosing frequency, which is 333 megawatts, right?
So to get the delay of one second, we just need to load our counter with the three amigos and that
is what we did over here.
So this requires a delay of one second.
We also need to set up the correct mode of operation, right?
So we need to enable.
The internet, as well as we want to operate in, and Rachel, in a previous case, we already discuss
how we utilize entrap without an ulterior motive there.
We just need to go formalistic dimer.
Now here we will be exploring the other alternative that you have, right?
So that is enabling it right now.
If you go to a watchdog panel who we do not have anything as SEC option or a great option right away.
Instead, we need to use case control, register and control register to decide the function, which
are allowing us to set up the correct mode of operation, right?
So here we have.
Get control, read this This basically written off washed or controlled.
Here we just need to pass an instance.
Structure, OK.
And then we also have a function to say the specific option.
Right?
So if you just go through and WTT and a S.W.A.T. away.
OK, so here you have an option.
For controlling IWD right to.
Here we have an option to enable an interest, right?
We also have an option to enable an auto reload more so this is what we required with our current data.
So we first read the existing option that we have learned.
So how we do that is we declare that you know why we declare you 32, because this function itself,
we tell you that you do, right?
So if you just explore, so this returns, you 32, right?
Hence, we declare you that you do not.
So this will be storing the existing option that we have in then.
Yeah, we just need to pass an instance structure all fired up and then we will just be all right.
This option, the existing option with the more that we want, right?
So we are enabling and we are also enabling it to look great and then we need to set this option in
our control register.
So we have set control Rick, which is an EPA that can be used to SECTOR-SPECIFIC option in and lost
all control at this rate.
So this are the series of configuration that we need to do.
We are forcefully stopping our timer.
We are setting up the timer mode because this we need to do when we are working with N.W.T., right?
So as soon as you set your WTT to work in a timer mode, this allows us to utilize and interpret that.
We are specifying the counter that we need to load depending on the delay that we are targeting, right?
And finally setting up this specific mode depending on our requirements.
So here we are targeting an auto reload as well as an intro, so we need to enable this two option,
right?
So once we complete the process of initialization of WTT, the next step is to initialize RJC, right?
So if you go to see here, we already declared to structure that is config structure and an instance
of it.
OK, and we are utilizing them to perform an initialization of Charge 2.0, right?
So first we call look up config where we specify a device, right?
So this will need.
The config structure for us, once we have a config structure, we call CFD initialize, which will
perform initialization of a gassy right, and this will also retain the status of an initialization
which we will be verifying against existing sets to see if it is equal to existing success.
We could just mentioned guessing it is successful, as we will mention, JSON great.
So as soon as we complete the process of gassy initialization, we proceed for exception Handler eight,
the first we initialize, then exceptional.
We call register handler here.
We need to specify the type of idea.
So until and unless you are targeting a different kind of ending, you need to specify an IQ as your
first argument.
The second argument is to specify a master handler, which will be most of the cases and in the instance
structure, which will be the callback data that we are targeting, right?
So once this three arguments are specific, we are ready to enable our exception right now.
If you.
The next step is to recognize the unique ID for our country, as well as the entertainment rate.
So if you go to the blue experimental artichoke.
Here you won't be finding a unique I.D., So if you just go to a WTT tab, you won't be finding a unique
I.D. And that is also the case when we are discussing the issue tomorrow.
So you just need to go to and experimented on the score.
Yes, OK.
And here you will be finding the unique I.D. Vector ID for your ID, right?
So here you have this I.D., which will be the first argument for iconic function.
OK, then we need to specify an entertainer, so for us, we declare it to be WTT Halo.
OK, and then the callback data will be the instead set your right to what this is.
Then we start enabling the searches.
So this enable function will allow us to enable this switch, right?
And if you explore the preference specific driver, so we do not have anything else, enable or disable
interpret so we could just ignore it.
And we are ready with the great.
So this are the only thing that we need to do when we consider it right now when we consider an interest
rate.
So since we do not have enable into the artist's ability to appear introspective like that function,
so they simply check whether our timer is right.
So this allows us to cross-check that there are categories, if you'd expect, OK, and if that is the
case, we have an interest.
This is what we're going to say to council, right?
So this completes an entire record for washed up time, and the process is exactly similar.
OK.
The only difference?
We do not have anything as a great option or a set option, so we can all get control and set contract.
These are the functions which are available with the WTT, right?
So easy to build an application project, and this is what we do when we complete our application project.
OK, and once are very successful and be able to get any if fight.
OK, so we select our application project, Debug as launch on hardware.
So this will change our perspective from design to diva, and we are ready to perform an execution of
this.
Only thing that we got to do is.
I click on a resume button to let us see the first two messages that you see as the is successful and
it is successful right down at an interval of one second.
We are getting a series of an event from IWD danger, right?