So let us try to consider how you handled the situation when you have multiple interests in your system,
right?
So what we're going to do is we will be utilizing and into from two different sources.
One of the source will be the slate, which either source will be push button, right?
We already have created a new project utilizing a diesel script, and we also have our data processing
system.
So first, we will add all the necessary pool to housing processing system that allow us to interface
the sleeve IP with disgusting system, right?
So to do that, we just need to customize our zinc processing system.
OK.
First, we go to special configuration in a gender gap.
OK, we have a clock reset, which we need to enable.
OK.
This will be providing a reset for all the sleep over it.
OK, we go to any sign on unsecure enablement and dare we enable anemic zero interface?
This is the second thing that we do.
Then we go to a clock configuration and we add APL fabric.
Right.
So let's just stick to our default value of 50 megahertz same legal right to literally distribute.
Now we are ready to add this right.
So let me just go ahead.
And search for UPI.
Right.
So this is our first instance of the GPI.
Let it just configure it to work with the slides.
So we'll just be naming this at light.
OK.
And then we customize it.
To work with the Slater, right, so we'll be utilizing only a single channel to go ahead, do a custom
and select switch for.
We also need to enable an to click OK.
And then we need to add one more instance which will be working with the push button, right?
So you can just copy this and pasted over here, right?
And let me just name this as push button, right?
So button.
And then we need to customize.
It says that it work with the push, right?
So we go to the GPO Channel one and then we select part and fullback.
We also need to enable and right now we have into from two APIs.
One of them is slates which IP and there will be a button IP, right?
So now we need to also enable the port, which will be sensing and into from a particular library so
that we go to a processing system.
Customizable.
OK, OK.
We go to an intro and we enable fabric and prep.
So this will be from peer to peer so we can just go in there and enable Inayat.
Right now, you could see we have a single port.
OK, very good for you to multiple interrupt.
And whenever you have a multiple sources, OK, so you need to add an intermediate contact Typekit where
you'll be feeding all danger to the input of open get IP and then output off the call and get IP will
be feeding to an AI, right?
So let's just click on this plus button.
Select content.
OK, now since you only have intro from two APIs, OK, so the default input port, which are two,
are sufficient for our state.
So we'll just be selecting for Studentship, connecting it to one of the code of and can get IP.
Similarly, second intro about connecting to the second and then all contact, right?
Then they'll put off a call and get IP will be connecting to an.
Right.
So this is how we will be handling a situation when we have a multiple enterprise.
So in a case, if you have to then to enter, you just need to customize the contact block by double
clicking on it and then choose the number of work, depending on the requirement that you have.
So this support up to 128GB.
OK.
So you could vary this from one to 21.
Right now, we proceed and connect the slave interface that we have on both Davis to the master interviews
optic processing system, right?
And we will do that automatically for us.
We just need to click on connection automation, select all the ports and then click.
Right.
We have a zinc processing system that is connected to enemy zero caught utilizing any saying they're
going to get to the slave interface or gold type.
We also have connected both danger to a concrete IP and we feed that when I write.
So this will be our block design for demonstration of how you use our multiple interest rate.
So we have a few words in our design deuterium fixed.
They are already connected to their respective open and switch and button.
Since this, I recognize automatically by and we will have an automatic heart rate connection rate.
If you go to a boat that you could actually verify, that does have any logic, right?
This basically signifies that both of this pool that is button and switch are already connected to their
respective hardware.
Rachel says this isn't just reality are designed to make sure that all the magnetic reconnection are
made to their respective open.
I want validation is successful, right, we go ahead and the Danish build up, right.
Now, since all the polls are been already mapped, the respect to how will you just need to go ahead
and generate a bit steam for higher wages?