Hello everyone.
We are from districts Nepal today.
We are implementing exit Excellency and the PMO due to a system generator.
So before we start I assume that you have a little bit of understanding about the exhibition that is
present in the 70s effigies and you have configured all the required tools that is needed to implement
this design first of all create a new project in view your I have already created into project now you
will meet the SABC IP from the IP catalogue you can either use to Exodus the IP from IP catalogue or
by creating the blog design and I'll go with the IP go slots for exhibition IP in DoubleClick then now
you can configure the XO to see IP from this window I just going to go to what I need
I didn't need to on arms so I selecting all the alarms
and I'll just enable a single channel for this tutorial to take OK and not to generate
now the order will generate the output products for the see IP and now you can see the customized IP
in the design sources expand that
you'll see a video file under the customized IP open that select all and copy all of this.
And now you can close the audio interface open up a text editor and bested it away and save it is a
new vista of fire.
Now open up system generator and create a new simile predict make sure you have all the speakers to
the models in a single folder and the first thing you want is a system generator token.
So source for heat
that will keep the system there it took him after this window opens.
We'll configure the board that we are using.
So I'm using a jet board so I selected board in comparison in this I'm doing the horror cost mission
so I select horror cost the mission we detect enabled.
No other options are necessary here and you can just click OK.
Now set assembling design in the folder you have abused him or just after you are set to design such
a black box a window will appear and ask for you to select abused your model and select the execution
module you kick open after this or contribution file will open in Matlab.
If you're assuming module has some combination logic in it you just want to leave this as it is if there
is a file only has synchronous logic.
You just want to comment this line.
No order chains are necessary in the state.
So close the configuration file now note that there are some requirements that you need to obey while
importing is done more less into a black box one of the requirement is that you must include a clock
pair into your SDL molded so you will need to have two in reports that correspond to a clock in your
SDL design clock ports do not Sorin is the black box.
This is because systems in order automatically hand this clock in the background.
Now I'll do the same for the order too modest and I have no source get me in and get out
get in and get way out will act as a input and operate before when they are converted into the EU.
In this design I have two inputs and flight force.
That means I will need to get ins and four get results
you will also need to configure it to get in and get results.
Double click that and a window will appear so I know the puts in my ears do moves are a single bit puts.
So I also like brilliant in under the implementation and tab I specify a location so here you need to
provide the location of the pin from which you are taking input from and in this field you need to provide
the input output the standard of the pin.
I have already configured the gateway in and get way out so I'll remove these and put previously configured
get routines and get results.
Should that source for a custom block and opening the value of the constant block will depend upon what
kind of reset you have in your system.
I have an active high visit so I'll keep a constant value of June.
Now I'll connect all the remaining input and outputs PMO idea 2 is running at a frequency of twenty
five megahertz the data the signal from the exit to see IP will remain high for 10 nanoseconds whenever
there is new data.
Really on the bus and since you are running the PMO did too.
At 35 Mares There is a task that double duty signal will be missed by the 25 megahertz clock.
So we need a single nighter to extend the data radio signal of the exit DC so that it can be recognized
by the 25 amigos clock off the gear too.
So this synchronization is maintained by the Center Block.
After you have set the design open up system demerger took.
So if all the things you have configured are correct you're going to generate this is an error related
to the cost and block.
So I'll open the Causton block and check if the settings are correct the reset are a one bit input so
I need to select a brilliant click Okay.
Now set the design and kicked him right after that the generation of the project will start.
This can take a few minutes and after the generous end of the project is complete a library will open
track the token that generated in the library into the designs and set the design.
Now you can close the library and also the system generally to me.
Now the wrong this design in hardware you need to take right after you click run the program with program
the board on the headboard a blue library lid.
If the borders prevent after the borders program to verify the design we are using our discovery to
switch to the reference program.
Now this is the signal I've sent it to exit.
After I click on that and I discovery to will send a signal to the exit to see the signal will then
be converted into digital and the digital data is get sent to the DRC the DRC will again recreate the
signal and that signal can be viewed here.
So this is a science signal I'm sending as just a signal to square it's in the area of the square.
So this is also today.
Thank you.
Have a great day.