And on to become this new one inner child going to upload the code to our board.
Now, the first step is connecting your SPF 30 to a board, go to the device manager to make sure it
is connected.
Now go to the COMPORTE section and you'll see column for for a labs C.P. 210 X, you speak to your art
bridge.
So good.
Yeah, select tools and make sure that Port for Comfort is selected.
Exactly like and the device manager.
Now, once you are very sure that you have the white board, do it.
Yes, be physical, difficult.
Version one.
And that I composed the last step is clicking the upload button.
Now you need to make sure that you have edited the aside and the Wi-Fi password information to match
your local audio or Wi-Fi network.
Once you are done, verify and upload the codes and you will see this message connecting the dots,
trying to connect to these people.
Once connected, it will start uploading a code.
Now we have an Iran timed out, so let's fly again.
I have switched the USB cable, the previous cable had the problem.
Now we are uploading the sketch again.
Now, as you can see, it's uploading the code without any problems.
So we just need to wait and see the serial monitor once the upload is done.
Now, as you can see, it's doing the set now, a song to connect the I find work.
These dots and our code means that.
That is our attempt to connect to the Wi-Fi network.
As you can see, we might need to do another or just sit.
So somebody in that baton now, as you can see, one fight conviction attempt.
Great.
Now it is connected.
Here we have Wi-Fi connection attempt, which is the line that we wrote this.
These are the dots while trying to connect.
Once connected, it will be connected to, I find it work with the name Ashraf.
Now, the IP address for USB 32 is 192.168.0.1 100.
Now elegant or to initialize the server has started successfully.
To access OTA update, you need to type this one hundred ninety two to two hundred sixty eight point
zero Dot 100 slash updates, so let's go with this.
And let's go to our browser.
And here we will paste this 192 100 state, zero 100 now before going to the update, we need to go
to the root.
This is the line that we lost.
Hello, this is Ashraf Educational Engineering.
Now we pasted the original link 100, 92, 168, zero 100, which the SPF 30 to the rest, then backslash
update, press enter and you will see the elegant or to or to update interface.
Now all what you need to do is select, choose, file, then update your SPF 30 toolbar.
Now this is to update the firmware.
This is stopped in the file system over the URL without connecting the compost and will do this and
that lesson.
Now for this lesson, all I think I need to do is to make sure that you have the box connected and the
code uploaded, and you can see this user interface.
Then you can move on to the next lesson.
Plus, watching this lesson, this is Ashraf home educational engineering team.