Now that we know how the basics of our server or how the observer works and in which mode SB 32 can
create an observer.
It's time to connect some leads to SB 32 that we want to control over Wi-Fi.
We need to start by finding a circuit design software, and I'm going to use fighting.
Well, we explained how to download and install the software.
So here it is now, double click the flies e five so that you can start running the software.
Now go to the board view.
Go ahead and dragged to leads.
You also need to resistors.
And we need yes, he bought right out a spear.
Karate speaks as a tool, but you won't find it, so you have to download it from an online website
now to find the SB 32 board library for freezing right fighting.
As you can see.
And we can go to the park, submit.
This is the world that we are using, do it SB 32, this version one.
Now this is telling that you need to download.
Click on it and you'll have it here.
Now let's open it up with rising file open and go to downloads.
Open it up.
And here you are.
Here we have the floods in.
For the SB 32.
They're facing globally for the SB 32 board.
Now let's zoom out.
And let's rotate, it's OK.
Rotate.
Now, first, we need to connect the ground to the ground.
And the 3.3 fold to the power.
Give it red coloring.
And give this a black, OK, now here we have two leads.
This is the first one.
And.
As you can see, it has two terminals, and we need to connect that as a store.
Now, each of these statements, when you point your mouse on this term, you can see that this is a
cathode and this is the.
Now let's connect the resistor.
To this leg, which is the anode and disconnect the cathode.
To talk about.
Same here.
Gethard to ground, and that is just sort of a..
Now the other terminal of that is thought to be connected to our board and in this case or in our case,
we need to connect it to.
These two pens.
The two.
And D5.
Not just the coloring makes the green.
Hungry.
Now we have our sport connected to Leeds, and it will turn these toilets on or off using our page,
and this will be explained in the coding section.
But that's it for now.
This is our very simple schematic, and I will teach you how to control your burbles input output bins
using double page and the coding section.
That's watching this lesson, if you have any question, please ask in the Q&A board and the library
for various people will be added as resources to this lecture so you can easily download it or you can
look it up online.