Hello and welcome.
Now let's try to pair our code or move our call to our ISP board and test this product.
Go to the device manager after hooking up your ISP board, make sure that it's visible as you can see
comfort.
Now go to the tools.
Make sure that comfort is.
Connected and choose your board.
We are using ESB 32.
They've got veteran one now.
Upload your code.
It will take like a minute, and after uploading, we are going to check what's happening using the
serial monitor.
As you can see, it's connecting to come for.
Now, it's that I think the code.
Three percent.
And it's moving on.
OK.
1790 100, OK.
Done uploading.
Now our board has the code.
Now click here.
As you can see, we did.
Ask the board to print DOT.
Let me minimize this.
Now, this means that Wi-Fi is not connected, so it will keep printing dots until Wi-Fi is connected.
So let's make sure that we have the Wi-Fi details that have correctly face I.D..
No, this is.
All of TV.
OK.
This is the password.
OK.
Let me check.
OK.
After checking, I found that my network name has two spaces after my name, Ashraf two spaces.
TV, so we need the code and two spaces.
Let's upload it again.
OK.
It seems like I have another issue, which is that my wife, it work, has two spaces here and one space
after the name, so let's go by the same name here from my daughter.
And let's paste it here.
As you can see, it has one space here, two spaces here.
So let's upload the code one more time.
I could have just cut this part, but I think that you should know that you might have issues connecting
to, I find it to a Wi-Fi network and you need to solve these issues.
And the best way is to copy your Wi-Fi network name and password from your vault or admin page.
OK.
Duncan Barling now when we click here, as you can see, it did connect Wi-Fi is connected this IP address
and it's showing my IP address.
And it did print the HDTV request data.
You can see.
Now, let's check our database.
Now, as you can see, we haven't received any data in our database, so let's see what is the problem.
Now, although this is a bit of quest, us is out.
Now, let's first check our database to make sure.
Now, if you have written everything correctly, you should see on this page, when you refresh it,
you should see the values here as you can see the location one two.
And here we get value one, value two, value three out of the timestamp.
The sensor data and location data are not feasible here, usually because we have the name wrong on
our HP file.
So let's first check our database and as you can see in our database, we are not getting these names.
This means that we have a problem with the post that fight.
So go to the data, file, edit it and make sure that you have the right naming for each of these.
Change this tool the same as in this one ISP code.
As you can see, we have since or we have location.
So this shows these web sensor.
And location, so sensor and hearing it right sensor and the location, we have to do the same for that
location.
And here we need to add the location now.
Same for here, OK?
They are looking correctly here.
You need to make sure that they are named the same.
Refresh the page and let's wait for another request.
Let's clear the output.
OK.
We did receive our request.
We can go back if we will refresh your database.
You should see the values here in your table.
OK, now, as you can see, Dutch and Home Office thus, and surname and the location are written correctly.
And if you're refresh the page here, you will see that we have touch on Home Office.
And the values from our sensors now, all sensor can be image sensor temperature sensor attached since
or any other type of sensors.
And in the next lesson, I will use three touch sensors and send their values to our web page.
Thanks for watching this lesson.
If you have any question, please ask in the Q&A about.