Hardware and software requirements.
Now we need an SPF 30 to a ball.
And we also need an Arduino board.
These are the hardware requirements since we are going to connect that.
Yes, people with Arduino Bolt.
We also need a TTL, let's say, level shifter, because ISP deals with 3.3 volt while Arduino deals
with five fold.
And since we need to can make that of these two more seriously, we need a converter and we will explain
that in the circuit design section.
Now you'll also need wires, a USB cable to connect your Arduino ball to your computer, and another
USB cable to connect your ISP ball to your computer.
And we will need an NQT broker account.
I would explain how you can do that, how can you, how you can create an account and what is security
protocol and why we need it.
We will also need an Arduino IEEE development environment, and I'm going to explain how you can install
it and how you can add the libraries.
We need to implement this project.
Now again, the five four two three one three volt level converter to convert the signal level is very
important in this project.
Otherwise you might damage your board and.
These are the things that you need to have before moving forward if you just want to gain knowledge.
You can skip the harder part and keep watching this course.
But if you want to do this practically, you need to have these tool boards and the converter as well.
Thanks for watching this lesson.
See you next!