1
00:00:06,950 --> 00:00:15,410
This is the shift register demonstration on the basis three board we have our Reset which is set as

2
00:00:15,410 --> 00:00:16,540
our top button.

3
00:00:16,700 --> 00:00:24,710
Our clock is a center push button or data and there's a switch in the bottom right hand corner in the

4
00:00:24,710 --> 00:00:30,720
left most for the most Ltds are then outputs A B C and D.

5
00:00:30,740 --> 00:00:36,820
So if I have my data in a zero and push my clock on notice that none of the Ltd's light up.

6
00:00:36,860 --> 00:00:44,870
Now if I make my data and as a 1 you should see that the Ltd's light up and if I go ahead and make my

7
00:00:44,870 --> 00:00:54,760
data in zero I can shift these two bits all the way across and if I go ahead I can leave this as a one.

8
00:00:54,860 --> 00:01:00,730
The shift across and just can never tell that there are oldest ones going in theologies are kind of

9
00:01:00,740 --> 00:01:01,840
constantly lit up.

10
00:01:01,870 --> 00:01:06,900
If I go ahead and make this zero I can clear it out by shifting through.

11
00:01:06,980 --> 00:01:11,300
Now the reset will clear all the bits are all the Ltds.

12
00:01:11,300 --> 00:01:13,640
If we push the reset and clock.

13
00:01:13,640 --> 00:01:17,920
So let's go ahead and put three ladies will light them all up.

14
00:01:18,260 --> 00:01:24,620
And if I hit the reset by itself nothing happens but if I press hold down the reset and press the center

15
00:01:24,740 --> 00:01:30,700
clock button at the same time you'll notice that it clears all the oldies.

16
00:01:30,710 --> 00:01:35,340
That's because the reset point takes effect on a clock cycle.

17
00:01:35,360 --> 00:01:38,010
So we have to keep that in mind when you're using a reset.

18
00:01:38,030 --> 00:01:43,490
So if you get this program on your board and you get to where you can push your left the right switch

19
00:01:43,490 --> 00:01:50,450
up and toggle your melodies through and every time you have it up gives you a anality on if you have

20
00:01:50,450 --> 00:01:51,980
it down and give you zero.

21
00:01:52,070 --> 00:02:00,200
So you can just kind of toggle through and get like a little Knight Rider thing going on and that is

22
00:02:00,200 --> 00:02:03,280
the shift register implementation on the basis through board.