Hi and welcome to a new section in this course in this section.
I wanted to give you an example of what it looks like when you start combining some of these groups
and little projects that you played with in previous parts of this course, in particular in Section
eight, you played with various senses, including the PMA 280, which you can see right here on my
breadboard, as well as the very simple to use 12 by two by 16 LCD display, which is using the exquisite
backpack so that you can connect it to your Isbister to via the ice Quixey interface.
So what I wanted to do in this project that you can actually see operating right here is to combine
the display with the BMY 280 sensor, both on the same I could see channel so that you can get data
from the sensor and display it on the side and also have an entity that blinks whenever there is activity.
Activity means taking data from the sensor and then showing it on to the display and triggering the
reading of the sensor using the hardware timer interrupt as we've seen again in previous lectures.
Now, in the next lecture, I'm going to talk a little bit about the wiring and the one.
After that, we'll have a look at the script.
But I just want to remind you at this point that everything that you're about to see, you have seen
before, there's nothing new here.
The only thing that is kind of new is a combination of knowledge that you already have in order to put
together this mini project.
So let's move to the next lecture.
Talk about the wiring.