This is mentioned in the first lecture.
So the idea is able to work with multiple Python interpreters, not at the same time, of course, but
it does give you the ability to select which interpreter you want to use next, also which device that
interpreter is installed on.
So in this lecture, I want to quickly show you how you can switch between interpreters to do that will
be using this show exclusively.
So if you go through tools and then options, you will see that under the interpreter to expand that
drop down menu and you'll see that then it comes equipped with a variety of interpreters.
There's an interpreter, that -- with itself, which is part of the environment.
But you can also choose to use the python instance that is installed on your computer.
Of course, you can run micro python on a variety of devices, including Acrobat Raspberry Pi picture,
and it's better to have already selected to be reduced since we installed the micro python firmware
on my brand new device here and we tested it as well.
I just did a simple calculation a second ago.
So we've got the micro python print.
This is information about the Python interpreter that we are using at the moment.
So if I do a little calculation like that, you'll see that it works from here.
I want to switch to the only built in.
Environment.
I can just do that for you.
That's only option it and go for the same interpretor which runs with Tony and do the same calculation
and the result, of course, the same.
So you can see that the name of this environment they're working on right now is Python three point
seven point nine.
But it's not micro python.
All right.
But how about something else?
How about we try micro python on the new Raspberry Pi pickle?
So this came out recently, about a month ago.
And I got a hold of a couple of those.
And it's a Raspberry Pi microcontroller that runs Micro Python.
I've got an letter here which is just showing me when power is connected.
This is this is not connected to a GPO.
So I'm just going to disconnect my inability to connect the Raspberry Pi pickle.
Is on indicating this power.
Let's see if we can use Microplace and it will go to two swaptions.
Select my out the Raspberry Pi pickled.
There's support for the picture.
OK, now I've got a new project here for Python.
This is Michael Python on a Raspberry Pi pickled with this C.P.U.
This microcontroller senior should say it are two zero four zero and.
That's one plus one two, so I was able to switch from the HP to microcontroller interpretor to the
Raspberry Pi pickle microcontroller inhibitor, and that's how you can switch from one device to the
other.
I've got a couple of lectures later on in this section where do a little bit more experimentation with
the Raspberry Pi pickle.
And I also got a micro bit here to show you how you can run the micro python on the micro bit as well
and use phony and easy to program these two devices.
All right.
Let's move on to the next election and we'll show you how to execute your first simple program, the.