Welcome, my awesome friend, I'll be all our great.
Today's lecture, we are going to start with Kate.
So go get your coffee.
Let's start first of all, what is Futu, Kate?
Kate, is engineering trolling system used for drawing?
Can be used by architecture.
Mechanical engineer and electrical engineer and structural engineer.
So we can summarize that OTAC can be used by any engineer for drawing up to contain multiple dips.
The other tip contains an new project, often project save and save, aze and print.
And undo and redo.
Also, a menu tips contain file edit if you insert and other tips.
Also contain that rebel tape, Rivne tape contain home insert and other tapes.
Today, we are going to start with the home tape.
Drilling deep.
As you can see in the home, tape contains that drawing group.
Would you find group, layer group and nutrition group?
Plock Group?
Properties group and for grouping and utilities, for measuring quick select and for the clipboard,
for cut, copy, paste.
First of all, you know, you can't you can do two type of select left, select or right select the
left, select is green, select the right, select is blue select.
We're going to learn later.
What is the difference between the Green Select and Blue Select?
Second thing you can see right here.
Differen.
Objects.
The first one is full to the wheel, if you want to see 2D, zoom all rewind here for zooming.
Here to.
Move by this hand.
And other Tepes, I'm going to use the zoom tape and choose.
Today we are going to start with the drawing group.
In the next lecture, we are going to start with modifying group.
So it's a start first.
What is the drawing group here?
You will find this things you will need to draw inside to get.
Light lt polyline circuit, art rectangle.
Old Elipse, old hatching, old gray.
All constructed three.
Food.
It's feline.
USPI billion by fitting.
Alex?
And cloud and the other thing.
So that's start with one by one.
Let's start with like this to wait to draw line, first of wait by precedent right here.
After prison right here, you can see the message of took speechify, first point of the line.
You can see it also right here, specifies the first point of the line.
I'm going to specify the first point right here.
Second message is this Supplies, I think, is the point, and then it specifies and explained right
here.
Now we have drawn line.
The first point is here.
And second point, it's here also, you can continue by drawing another line.
Like this and like this and like this.
But if you want to stop drawing lines, you can is keep painting from the Keyport to stop doing lights.
As you can see, that line comment is used to draw a line, multiple lines, each line is separate lives
in other lines like this.
This return the pick.
For green drag and blue select.
What is the difference between, say, Green Select and blue select?
If you want to select any object, let's say this line, this line, we won't select it.
This to wave the first wave by Green Select and other wee boy blue select.
If you want to use the green select, you will need only to select only portion of the object you will
select.
Legs it, if you use as a blue select, you will need to select the entire object.
Legs this deselected.
Let's see it again.
If I select only a portion of it, we cannot select again.
If we use the blue select, we cannot select the object by selecting only a portion of it.
So we will need to select the entire object by Blue Select.
OK, let's escape.
Now, we have learned to draw the line by line command from right here.
Let's see.
Remove everything and delete it like this.
Second missile to draw a line by pressing in, enter and enter.
You will be asked, is this voice the first point?
This is the first point.
This is the second point.
Third point or spun and L'Express escape.
As you can see now, you can draw the line by two missiles for this missile.
From like here.
Second missile by pressing l enter.
OK.
Second drawing object is polyline.
What is the definition of pully light?
Let's try to do it.
If I press is besides the first point.
Second point.
Third point.
Force point.
As you can see, you are drawing this similar to the line of command.
What what is the difference between the polyline and the line command?
This is Troy.
Make it here to see the difference.
So right one is.
Lying commend the left one is polyline.
If you select any line.
Like this line, this line is going only to be selected in the line comment, what input do you like
command?
If you selected any line, you are going to select the entire object.
All line has been drawn by the Poldi lights.
OK.
This means pulley line consists of different line connected together to form a complete sheet like this.
What's the line command only defined?
Only one line Spratley like this.
OK, this is to move everything deleted.
This go.
If we want to draw the line from right here or you can press B.L. enter be entered.
Also, another way to draw the appley light, OK.
Escape.
Now we have learned how to draw the line by two missile first way is by pressing polyline from the roving
group or another way by writing the enter.
This.
Now we have learned to draw the line and polyline this, think we are going to learn is that circuit.
Two draws a circle, there is many way to draw the circle.
First, wait by specifying the red center is the radius.
Second, wait by center and diameter.
Third way to point.
Of that circle served way, three point circle.
First way, that tangent to the circle and the radius and the first point that three Tenjin point.
I'm going to be the first one, the center and the radius.
You can choose the senator from right here in the radius as you.
Like this or entering the radius by yourself, let's say 500 millimeter, this 500.
OK.
That is a way to draw a circle by placing see.
Enter this voice, that center and SIFIs the radius or.
It shows the radius, let's say, 200 this time and present.
So there is still weight to draw a circle first wave from right here on the left.
The second way from person to into is flying that first point.
Now we have learned how to draw a circle.
Let's go to the next thing, the arc.
There is many way to draw an arc.
The first way, by using three points, how we are going to do this.
Let's see price arc right here.
This is the supplies there.
Three points.
One right here.
And second right here.
And third right here.
Now, we have drawn an arc by three different points.
That another method is for using thought center and just mean by using the start point and the centrepoint
ends in point.
Like this.
Another Weepies displays are stored and center in anger.
Also, why is thought center and let's.
Also can be drawn by his thought in an angle.
There is menu.
I prefer this repoint as an electrical engineer.
Three point.
OK.
There is another way to draw an arc by pressing a enter a enter satisficing, first point.
Second point and third point.
Now we have learned to draw the arc.
This is Drew.
The next thing is Rick Rectangle.
There is many ways to draw a rectangle.
The first mishod is.
By specifying this first Cordner second missile is flying the opposite corner.
If you cannot speak, voice it over the corner.
And those are they mentioned for this rectangle.
This go to dimension right here, and the interest that I mention for this recording, first of all,
specify that length of rectangle, the length of rectangle is 200.
And the width of rectangle is 100.
Now you can draw one of the full rectangle right here, all right here or right here?
Right here.
I'm going to choose it right here.
Does this mean we have drawn this rectangle with 200 on the lines and.
One hundred on the width.
Now we have learned to draw rectangle from right here.
Second way to draw a rectangle by pressing R, e, C and or e C enter.
It's a very different point at the opposite corner, so to draw.
There is another way to draw a rectangle by pressing or easy internal audit.
You see interest surveys, the first point and the opposite corners.
Now we have learned how to draw a rectangle.
And this the things we are going to learn today is how to draw an ellipse to draw in, and if there
is any way to draw an ellipse first way by using a point.
First point is the center.
Second point is that radius and the other radius.
Let's try this one.
I'm going to specify the center right here and Z.
Other radius, this is about radius, the radius is going to be right here.
Like this.
This means you can do it by two point and the simple, OK.
If you draw, let's see, a circle like this and rectangle like this.
And you want to hash that space between the circle and the rectangular.
You are going to choose Haiti from right here.
You can choose the different kind of hedge as you want.
From right here and that user defined as you want.
I'm going to choose this one.
I love this one.
And also, you can choose the distance between the lines of hedge right here from, let's see, twenty
five.
Distance between hit and choose the things you want to hedge this point, all this cheap or zesty.
I'd like to hedge this cheap.
Also, you can choose the color of hedging.
You can choose it as red.
Or green or another color as you want.
I'm going to choose this one.
OK.
If you want to finish, you're hatching the laws, hitch creation.
Now, after finishing your hatching, if you want to hatch another sink, let's say this space.
I'm going to press hatch again.
I'm going to choose another car this time.
I'm going to choose this kind of hatching.
I'm going to choose this point.
OK, and remove.
OK, now we have learned how to draw a line, fully line circle art and rectangle, ellipse and ellipse,
earth and hitch.
Let's see other things like this.
Ray.
This rate, you are going to specify only the first point and leave it is going to continue until infinity.
Like this.
This, as you can see, is going to continue as Infanti.
Also, you can draw a line between two lines like this.
Also can be drawn by pressing Excel, enter like this.
OK.
Also, you can draw that line.
It's benign.
Like this.
If you want to stop drooling, please skip.
Again.
Satisfies the first point.
Second, plants are buoyant force point emesis U has finished in the entire drawing winter.
You have saved the job.
If you want the latest press, delete selected to delete.
Other thing you can do is drawing a cloud.
If you want to draw a cloud to specify anything, you want, change, and later, like is this like
this, like this, like this, like this?
And president.
OK.
Another thing you can do is that helps to draw Helix into the remember, you are a 2D, you can draw
helix legs.
It looks like this.
OK.
After finishing drawings, Alex presenter again, this draw Alex again.
Spaceflight headaches from right here.
This fight, the center, the aner, the amateur, and this continue until you want to stop.
I am going to truth right here to stop and present.
This is another Alex.
We are in electrical engineering.
We don't need the helix throwing colors.
Another thing you can do is donate.
Just before this center, Z.
As you can see, these fights inside them matter.
This is busboy's fuzzy inside Demitry.
You can see this fight right here like this or entering by yourself.
Let's see.
I'm going to enter.
It is one hundred.
Let's enter the outside the amateur.
We said the first one is 100, is 150.
Now listen to for this interview.
I'm going to divide the center right here, OK?
You also can do it for another.
Point like this, I was this was this or this or this.
If you have finished press escape and now everything is bliss, OK, let's delete all of this and leave.
If you want to divide any line, the state divide, any line, this line, we want to divide it into
a map.
Let's see for object.
Zeus, do we buy the Ivy enter?
Or from right here, divide.
OK, I'm going to do first before seeing the white d.d.
B.
C Enter DDB Tinter specifies the object, which is going to divide the line, you want it to be dot.
Like this Ross Circle was cross.
I'm going to satisfy this kind of things.
Oh, OK.
Let's start with the very first thing.
Select the object.
Choose divide from right here.
Int. number of segments you want to divide this line into?
I'm going to divide this line into four segment and wanted to have one thing I press for segment.
As you can see, one, two, three, four segments.
OK, let's see another way.
This line we want to divide it also by Azzawi, the Ivy Enter.
Select the object you want, divide.
How many number of Sigmon you want to divide into?
Let's see, this time is five.
Segment, as you can see.
One, two, three, four, five, five, seeman to default.
OK, guys.
That's it for today.
Thank you for watching.
See you in the next flush.
Bye bye.