So now remember that we have our IP, which is just created by us, is inside a project.
OK, we will just close our project and what we do is we create a block design in a new direction.
OK.
So we'll start with the project will click next, will choose the final project folder sixty four will
proceed, will again choose.
We know that we have made our IP compatible to Antarctic's seven family.
We will choose a booster's that we are able to observe the.
I'd be entitled to say, OK, so we have to send an Arctic seven family and then we'll just finish.
OK, so now I just try to create a blog to say.
OK, and I try to find out and that Peter.
Let's see what happens when I click on Presbyter and I try to search for and then the school age will
be finding an IP by default in the block because we do not have our IP as well as block design in the
same territory.
So now will understand how you handled this situation.
So we'll just go to a setting.
OK, then you have an IP setting over here, OK, or else you can just right.
Click and then also you get directly to an IP set.
OK, so just go to an IP, ok?
You can follow any option that you want and then we go to a repository.
OK, so here we need to specify a repository that we have an IP so we know that there are IP inside
the security folder.
So we'll just click on this side button.
OK, and then we know that we have our full address d the vital project, and then it should be project
sixty three days.
So we'll just go ahead and choose Project 63 and once we select, we'll be finding if we are able to
find any IP inside that folder.
So it will automatically give you a notification that one repository was added to your project and if
you just search it Isar and then the school will just select and will click apply and will OK.
Now if you just go to the same again and we search for nine at the school now do that I take.
So this is how you refresh an IP repository.
Now, let's assume that you want to make changes in this IP.
So you later found out that instead of an engine, you want to have an arcade.
OK, so how do you handle that situation?
A workaround will be that you go to your previous project that is project and exclusive city, that
you modify, that you modify the code and then you try to change that IP or an IP the other way around
you to select an IP.
Right click and you get an option to edit in an IP package.
OK, so we'll just select and edit IP packages.
So this will automatically create a new vido project.
So instead of we going into a project and a specific city and doing an update instead, we will automatically
create a new Revital project for us once we write click on an IP and we selected it in an IP package.
So finally, we now have our school here.
OK, so we'll just change this from nine to.
OK, and then we'll see why.
So once we see Laku, OK, let let us allow vital to update and hierarchy and then we go to a package.
OK, so immediately you'll be finding that we recognize that there are some changes.
So you have changes on a custom edition parameter portside interfaces to do one package.
So wherever you see a pencil and paper.
So there you are to have identified that you have done some changes so we can just go ahead and then
we can select this option much.
Then you again go to the one package, then you select this option.
One more important point is if you just go to the.
ID there, we also get an option to choose a category.
OK, so if we are developing an app for a specific category like communication interface, then you
can in fact specify the communication category and then your IP will be displayed in that specific.
Plus, right now, it has been chosen as USRAP, so you can look around and see how you can choose a
different class once you merge all the changes, you go to review and package and you just hit repackage
and once you repackage, word will automatically close a project.
OK, so this will be package and it will automatically go to a project again once.
You close a project or once you update and you'll be immediately seeing a notification that the ad on
the script, but you should be updated.
That is, we have an update on an OK.
In fact, if we go to the.
Report, I be straight with you.
OK, so we'll be finding that we immediately get one more step, which is to say and you will be finding
that IP believe in change and IP definition has changed.
OK, so we can just select that IP and that has been selected by default.
OK, and then you can just click on Upgrade Selected so we will automatically upgrade an IP for us and
it will in fact update all the files which are available with an IP.
OK, we'll just.
Lecoq.
And then we'll just have to see whether it is up to date and we'll find it that, no, we have our IP,
OK, so we'll just verify whether it is working as an OK, so we'll just go ahead.
Right.
Click make external.
OK, again, this should be make external.
And this output should also be meekest and.
And we'll just change the Courtney E!
Then we have B and then finally we have white.
OK, now, once our design is ready and clear out and then validate design, so once validation is successful,
go ahead to sources and right.
Click and create and still happen.
So one side is ready.
Now, what we do is we just perform a simulation.
OK, so we'll use a false confession rate like false concerning foreign hexadecimal to decide when and
when you're here.
OK, and then for the ladies I see 22.
So if this is behaving as an --, so we should get one one at 10:00.
So if you just try to execute our call, you'll be fine.
We have one.
So obviously we have defined it to be an Ankit, and that is we might be getting all to you, but when
we replace or update our IP, we can actually see that it is behaving as a..
OK, so now you have an idea of your updated IP.
So there are two ways you can either go to an old project where you have created an IP.
There you.
Update the changes, OK, and then you edit your IP package or finally repackage your IP, or you can
just right.
Click on the IP that you have added on Tuesday and then you can just click on edit IP package.
So that will give us some flexibility which method to follow.
And we have also gone through how we refresh a repository if the IP and the blocked design is located
in a different project.
OK.